Dealing with pool algae is a challenge.
You must consider what’s causing the pool algae and how to keep it away. Many pool owners don’t know where to begin and end up using algae removers to do the job.
While those do work, you should also look at solutions that are set up with the pool skimmer.
This is when you need to learn how to use copper pipe in a pool skimmer.
To use copper pipe in a pool skimmer, invest in corrosion-resistant piping only, cut the pipe to the perfect size, secure it, and then test the system. It should not leak and the flow rate should be consistent. This signals a successful installation.
This is one of the better options available to those who want to maximize their pool setup. You will want to optimize the pipes in the pool and this is one option that will work.
This article will show you how to set up a copper pipe in the pool skimmer.
Table of Contents
How To Use Copper Pipe In A Pool Skimmer
1. Use Corrosion-Resistant Pipe Only
The first step is to assess what type of copper pipe you’re going to use in the swimming pool.
The wrong type of copper pipe will do more damage than good. This is due to potential leaking and/or holes that will emerge as time goes on.
So, what type of pipe should you buy?
You will want to look at something that’s made for swimming pools and can handle water. This means it needs to be corrosion-resistant.
While it is not just the pipe that is going to matter, you will want to prioritize this as a part of the installation process. If the pipe is good, it is a lot easier to make sure the installation is done the right way too.
Using the right copper pipe for the pool skimmer is a must. It’s the best way to make sure the pipe lasts a long time and it works as well as it needs to.

2. Cut The Pipe
You will also need to take the time to prepare the copper pipe.
This means ensuring it’s installed the right way.
A lot of people don’t know how to do this and will end up wasting time with how the pipe is set up. This is a major mistake because you will want to look at measuring how the copper pipe will fit and where it’s going to go.
This information is pertinent.
It’s the best way to make sure the pipe fits and it does not get in the way of what you are doing.
When the copper pipe is not cut properly, it is not going to help the flow rate. This will create a situation where the flow rate is going to worsen with time and it is going to take away from what you are hoping to do.
3. Secure The Pipe
When the pipe has been cut, you are now going to begin the installation process.
Assuming the size is good, it is going to be a perfect fit.
You should look to use a secure fitting to make sure the copper pipe does not budge once you have set it up. It’s important to do this as you are not going to want the pipe to start moving as soon as the pool skimmer is in place.
It has to be functional and help with the flow rate.
It’s also recommended to clean the copper pipe using vinegar beforehand. This will help you start with a blank slate when it comes to the pipe.
4. Test The System
Now it’s time to test the system.
You will want to see what can be done to make sure the system works well. This is key when you are attempting to understand your options.
You will want to test the system by turning on the pool pump and getting the water to flow.
What will you be looking for?
You will be looking to see how the system works. Does the water flow smoothly? Is there a leak to deal with?
Final Thoughts
Can you use copper pipe in the pool skimmer?
You can use a copper pipe in the pool skimmer. It will help remove algae and optimize the flow rate. It’s best to choose a corrosion-resistant copper pipe, cut it to size, and then secure it with the right fitting. This will ensure the flow rate is consistent.
These are the details you need to think about when you are managing a situation where the flow rate is off.
Just changing the pipe is a good step in the right direction.
This will ensure the pipe works well and the water continues to flow as required. It will also keep away the pool algae.