Due to the nature of how a snowblower is used, it can create a situation where it won’t work as it was the winter before.
You will always want to keep track of how the snowblower is doing and whether or not adjustments need to be made along the way.
You might have a situation where the Craftsman snowblower won’t start after sitting.
If the Craftsman snowblower won’t start after sitting, drain the fuel, add fresh fuel with a fuel stabilizer, and check the spark plug. If everything is fine, throttle to high, set the choke to full, and then turn on the snowblower.
It’s important to go through these steps or you are going to end up with a snowblower that gets damaged.
This article is going to take a look at what to do when it comes to a Craftsman snowblower that won’t start after sitting.
Table of Contents
How To Fix Craftsman Snowblower That Won’t Start After Sitting!
1. Drain The Fuel
You will always want to take the time to drain the fuel.
It is common for a Craftsman snowblower to not work because there is old fuel in the tank.
When there is old fuel in the tank, it is going to cause the motor to stutter. This is assuming the carburetor has not been damaged due to how long the old fuel has been in the tank.
You will always want to be quick to drain old fuel in a snowblower if it has been there for more than 30 days. This is not good for the snowblower or any of its internal components.
You will want to do this before anything else.
Another option along the same lines is to simply let the snowblower run and the fuel will finish on its own. Doing this means not using the snowblower while it is on.
The only time you are going to want to use the snowblower is when it is full of fresh fuel.
2. Add Fuel Stabilizer And Fresh Fuel
Now it is time to prepare the snowblower the right way.
The first option is going to be to add fresh fuel and a fuel stabilizer. This is going to set a strong foundation for the snowblower to work as it needs to.
You will want to be careful while doing this and that is a major requirement when it comes to how the fuel works.
If there is old fuel in the snowblower and it has not run out, you can add fresh fuel on top with the stabilizer. This will help regulate how the fuel works.
This comes down to what you believe is best for the snowblower.
For the most part, you should be looking for a fresh start rather than attempting to use a snowblower when it does not have fresh fuel inside.
3. Check The Spark Plug
A potential issue that can arise when it comes to a snowblower not starting has to do with the spark plug.
If the spark plug is broken or not working properly, it is possible there will be a bit of sparking to deal with. This is difficult to handle and it is going to do more damage than good.
You will want to be particular about how you manage something like this to ensure the spark plug does work as it needs to.
Look into this and make sure the spark plug is not the reason for the Craftsman snowblower not starting.
4. Set Throttle To High And Choke To Full
Now it is time to start looking at the settings for your Craftsman snowblower.
The first thing you are going to want to look at will be the throttle. You will want to set it to high.
This is going to help set the foundation for how the snowblower starts and it is going to give it the kick it needs to begin.
You will also want to set the choke to full during this process.
This is how you are going to see good results and it will work out as planned.
These steps will help with a Craftsman snowblower that won’t start after sitting.
If a Craftsman snowblower won’t start after sitting, start by draining the old fuel and replacing it with fresh fuel plus a stabilizer. Once done, check the spark plug for damage, set the throttle to High, and the choke to Full.
At this point, you are going to be ready to start the Craftsman snowblower and it will work.
When you are checking the different components, it’s important to stay patient. This means looking into the finer details of how the snowblower works and what the settings are. This is essential for you to avoid a situation where it does not get damaged.