If the Echo blower won’t start, it’s essential to understand what’s going on and how to get it back running at 100%.
The Echo blower is resilient and will work well when it is set into motion. The goal should remain to understand what’s required to get more out of the leaf blower.
An issue people report is when the Echo PB-2651 won’t start.
If the Echo PB-2651 won’t start, make sure there’s enough fuel in the leaf blower. Next, check to see if the spark plug is damaged and if the ignition system is turned on. The last step is to see if the air filter is clogged or malfunctioning.
There are numerous reasons why the Echo blower won’t start and it’s best to take your time during the process.
You don’t want a situation where the leaf blower does not start and then breaks down completely. This can happen when you continually attempt to start the leaf blower without considering how damaged it is.
This guide is going to look at how to fix the Echo PB-2651 that won’t start.
Table of Contents
How To Fix Echo PB-2651 That Won’t Start
1. Look At The Fuel Level
If the Echo leaf blower won’t turn on, it is important to go with one of the simpler reasons for this happening.
You will have to make sure there is fuel in the leaf blower.
This tends to happen when a brand-new Echo blower won’t start. It could be in a situation where you have not filled it with the necessary fuel to get it to run.
This does happen and it is important to be diligent when it comes to how to maximize the fuel level.
You will want to see how the fuel level works out and how to get it to do more over time. You will want to ensure there is enough fuel in the leaf blower and that it is the right type of fuel too.
If not, the leaf blower is not going to work regardless of what you do to it.
2. Inspect The Spark Plug
You will want to look at the spark plug.
When you turn on the Echo leaf blower, it needs to spark to ignite. This is the only way the fuel is going to go through and then start the leaf blower.
In some cases, you are going to hear a small sound start up when you try to run the leaf blower. This is a sign there is enough to make this noise but not enough to get it to start.
You will want to look to see what is wrong with the spark plug.
Sometimes, the spark plug gets damaged and has to be replaced. Look for a compatible spark plug when this is the case and replace it instantly.
3. Make Sure The Ignition System Is On
When the Echo leaf blower won’t turn on, you will want to think about the ignition system and how it is set up.
The ignition system needs to be in the “On” position.
This is the only time the leaf blower is going to turn on. Otherwise, it is not going to do much and is going to stay as-is.
Look into this to make sure you are not creating a situation where the leaf blower does not run as you want it to.
If the ignition system is not on, you will want to turn it on and then see if the leaf blower works as intended.
4. Clean Or Replace The Air Filter
The last step is going to be to assess the air filter in the leaf blower.
This will give you a sign as to what is going on with the leaf blower and what needs to be done to get it to work properly.
You will have to see if it is clogged.
When the Echo leaf blower is clogged, it is not going to start. You are likely going to hear a noise as the leaf blower attempts to turn on but it will continue to fail.
In some cases, it will turn on for a few minutes and then falter.
Both situations are not good.
You will want to see what can be done to the air filter to get it to run. Sometimes, you will have to switch out the air filter in the Echo blower.
Look at these steps if the Echo PB-2651 won’t start.
If the Echo PB-2651 won’t start, it’s best to check the fuel level and see if the spark plug is damaged. Also, make sure the ignition system is turned on and the air filter is unclogged. If it is clogged, replace the air filter.
This is going to make sure you are not dealing with a situation where the air filter is getting in the way of letting the leaf blower run.