Filling a pool means finding a quality water source.
After all, you are going to be swimming in the pool and it is not good to be wading through dirty water for long periods.
This is why you will want to keep tabs on the quality of the pool’s water as time goes on.
One issue people deal with is when they have filled the pool with well water and now it’s brown.
If you filled the pool with well water and now it’s brown, start by testing the pH level. If it is far above 7.9, add liquid chlorine to the pool, wait a few hours, and re-test the pH. It is also recommended to remove visible debris from the pool.
For the most part, well water is not ideal as a way to fill the pool. It can be used as an option but you will need to be far more diligent about how clean the pool is during the year.
This article is going to teach you how to fix a filled pool with well water that’s now brown.
Table of Contents
How To Fix Filled Pool With Well Water That’s Now Brown
1. Check The pH Level
You will want to start by checking the pH level.
This is a major concern and it’s something you will want to focus on as it will let you know what’s working and what’s not.
The main issue has to do with the pH level going far above 7.9.
This is when the pH level is going to be a concern along with the visibly brown water. In this case, you will need to start thinking about changing the chemical disposition of the water as soon as possible.
If it is too far gone, you might have to flush the water and start again. This can happen if it is completely brown.
2. Remove Debris From The Pool
Before starting on the water’s chemical orientation, you will want to look to remove debris from the pool.
This is essential as you do not want debris to be floating around in the pool for long periods. This is only going to ruin the pool and it is not good for the long run.
You will want to take the time to remove this debris and then start working on the pH level of the water.
If there is no visible debris in the water then you can begin working on changing the water’s orientation. Until then, you will want to focus on cleaning the water and then focusing on the chemical details such as the pH level.
3. Add Liquid Chlorine To The Pool
Let’s assume the debris has been taken out.
At this point, you will need to start focusing on what can be added to clear out the water. There will be a few options available to you as a pool owner and it is best to start with liquid chlorine.
Liquid chlorine is the best way to stabilize the water in the pool.
It will also help clear out the brownness of the water and will ensure you can swim in it again without worrying about your well-being.
A pool with well water has to be tested due to the health risks that can come when it is not clean. This is something you will want to dig through and work on.
Adding liquid chlorine is going to go a long way.
4. Re-Test The Pool’s pH
You will want to take the time to re-test the pool’s pH.
This is a real concern when it comes to ensuring the pool is in good condition. If the pool’s pH is not good, this is the last thing you are going to want to deal with.
It is important to think about testing the pool’s pH multiple times to ensure you are on the right path.
If it is still too high, you will also want to take the time to look at the pool filter and pump. The components need to be working as required since that can also impact how the pool works.
Final Thoughts
These tips will matter when you filled a pool with well water and now it’s brown.
If you have filled a pool with well water and now it’s brown, the best place to start would be to check the pool’s pH level and see how far above 7.9 it is. Once done, remove large debris from the water and add liquid chlorine in small amounts. Continue to check the pH level until it gets closer to the desired level.
This is something that is going to involve a bit of trial and error on your part as a pool owner.
