Why Is The Fire Pit Flame Too High? (Fixed)

It’s important to think about how you are going to manage a fire pit flame.

Fire pits are not automatically going to be set in a way where things are optimized for results. It’s possible you could have a situation where the fire pit flame is too high.

If the fire pit flame is too high, start by reducing the fuel level and using smaller wood pieces. This will help reduce the flames. Next, cut down on the airflow by closing the vents slightly and look for a flame control knob that comes with specific models.

If there is a flame control knob, this is the easiest way to control the fire pit flame. If not, you will need to look at the other tips that are given in this guide.

Steps To Fix A Fire Pit Flame That’s Too High

1. Reduce The Fuel Level

The first thing you are going to want to do when the fire pit flames are out of control is to look at the amount of fuel that is in the fixture.

This is what is causing the flames to rise.

The fuel is going to be sparking the flames and causing them to rise to levels that you don’t want them to be. This is key and it is something you are going to want to consider when working on the fuel level over the long term.

You have to make sure the fuel level is sustainable.

This is why you will want to cut down on the amount of fuel that is going to the fire pit.

This is one of the more common reasons for the flames rising.

If you have a gas fire pit, you will also want to take a look at the main gas line. Is there too much gas flowing into the fire pit?

If so, this is the reason the flames are not under control when it comes to how the fire pit works.

2. Use Smaller Wood Pieces

You have to think about the wood pieces too.

If the wood pieces are not the right size, you have to make sure they are kept under control. This includes how the wood pieces are being set up and which ones you are using.

Sometimes, you end up using wood pieces that are too big for the fire pit. This will allow the flame to expand to the point it is too high.

After all, it is the wood pieces that are going to let the flames flourish. This can be a good or bad thing depending on how you are using those wood pieces in the fire pit.

Focus on this and make sure to cut down on the wood pieces you are using to regulate the flame size in the fire pit.

3. Reduce Airflow From The Vents

Next, you are going to want to take a peek at the vents.

Fire pits are going to have vents to make sure oxygen is getting to the flame. This is fine but it is also a sign there is something wrong with the vent and too much oxygen is flowing into the fire pit.

This will have to be controlled on your part.

You will want to do this by reducing the amount of air that is coming through the vents. If you cut down on this, you are going to have a much easier time managing the airflow instantly.

4. Look For Built-In Flame Control For The Fire Pit

If the fire pit flame is too high, you can also look for a built-in knob.

This knob is designed to help control the flame based on how much gas is flowing into the unit. This is going to depend on the make and model of the fire pit.

In general, this is commonly seen with newer models.

For the most part, you want to ensure the flame is kept under control and the fire pit continues to function as you need it to.

This is how you are going to get things to remain under control over the long haul.

Final Thoughts

These are the reasons why the fire pit flame is too high.

If the fire pit flame is too high, it’s best to start by cutting down on the wood pieces inside and checking the fuel level to make sure it’s not too high. Next, close the vents a little to reduce how much oxygen is getting to the flame. In some cases, a flame control knob will be available with the fire pit and can be used to reduce the flame’s size.

You will want to look at each option to see what applies to your fire pit model.

Some will have the knob and others will require manual changes such as reducing the size of the wood pieces in the fire pit.