When a gas grill is turned on, it’s easy to worry about the flame.
The flame needs to be under control and it also has to be strong enough to heat up the grill. There is a balancing act between what works and what does not in a situation such as this.
For the most part, the gas grill flame is going to be fine.
However, in some situations, the gas grill flame will be near the knob.
If the gas grill flame is near the know, the venturi tubes are clogged. To fix the issue, inspect the tubes, find where the blockage is, and then clean out the tubes. This will help control the gas grill flame.
It is easy to assume the process is going to be straightforward or it will go away on its own. The problem will not go away as the blockage needs to be cleared out. Until this happens, the gas grill flame is going to be near the knob.
This guide is going to take a look at how to fix a gas grill flame near the knob.
Table of Contents
How To Fix Gas Grill Flame Near The Knob
1. Inspect The Venturi Tubes
You will want to start by looking at the venturi tubes.
This is where the problem is going to lie when the gas grill flame starts becoming noticeable near the knob.
The issue that happens is the gas does not get to go through the tubes. This is due to the blockage that is in place.
If there is a minor blockage, this might not be a serious concern and you are not going to see the gas grill flame worsen. However, it can get to the point where the gas grill flame becomes dangerous and the reason has to do with the gas getting backed up.
Your best option is to continue to take a look at the venturi tubes.
This includes whether or not the tubes are damaged. This will allow you to then concentrate on removing the blockage in the tubes.

2. Find The Blockage
Where is the blockage in the gas grill?
This is what you are going to have to focus on.
Since you are aware the issue has to do with the venturi tubes, you will know where to look. This is a good starting point but that does not mean you are aware of where the blockage itself is located.
You will need to pinpoint its location to make it easier to clean out the tubes.
Look into this to figure out what you are going to do and how you are going to plan the process. This is how you are going to see appropriate results as soon as you begin working on the venturi tubes.
3. Clean Out The Blockage In The Tubes
Now it is time to start working on the venturi tubes.
You are going to want to be patient while working on the tubes.
You are going to start by removing the burner and venturi. Next, you are going to insert a cleaning brush into the tube and look to push the debris out.
Once you do this, the debris will fall out.
You will have to go through the entire length of the part to make sure all of the debris is gone. This might take a bit of time but with the right cleaning brush, you will see the results you set out to get.
4. Restart The Gas Grill
The last step is going to be the restart the gas grill.
When a gas grill has a gas blockage, you will want to act fast. This is key when it comes to getting the gas grill to run properly and yield the results you are hoping for.
If there is a blockage in the gas grill, it is going to impact the gas grill’s flame and how it heats up. This is not good.
You will want to take the time to restart the gas grill and make sure it turns out the way you want it to.
Final Thoughts
Why is there a gas grill flame near the knob?
If there is a gas grill flame near the knob, this means there’s a blockage in the venturi tubes. To fix the issue, remove the burner and venturi. Once done, take a cleaning brush, push it into the part, and get rid of the debris. Reset the parts and test the grill again.
At this point, the gas grill flame is going to work as you want it to.
This is a sign the gas blockage is gone in the gas grill and that it will work properly. Take your time during the cleaning process to ensure the debris is out of the way.