When using the Ariens snowblower, it’s essential to know how to use its settings.
You will have to account for a few things while doing this including the conditions. If you don’t take the time to analyze the amount of snow on the ground or the type of surface you’re dealing with, it’s easy to use the wrong speed setting with the Ariens snowblower.
This is why learning how to adjust the speed on an Ariens snowblower is a must.
To adjust the speed on an Ariens snowblower, start by using the knob on the handlebar. Turn the knob left or right to increase and decrease the speed. Choose a higher speed setting for heavier snow and always test the snowblower once the setting is locked.
In some cases, you will have to adjust the speed setting for the Ariens snowblower based on different parts of the driveway.
This does happen and it has a lot to do with the way a snowblower moves through the snow. If you are not careful, it’s easy to damage the snowblower or for it to get stuck in the snow.
This article is going to look at how to adjust the speed of an Ariens snowblower.
Steps On How To Adjust Speed On Ariens Snowblower
1. Use The Knob On The Handlebar
You will want to begin with the handlebar.
The only way you can adjust the speed of an Ariens snowblower is by locating this knob. It is specifically designed for you to go through the speed settings.
In essence, this is going to be a small knob that is going to be conveniently located in a spot that is easy to reach.
You are going to use this knob as a way to pinpoint what speed setting you are looking for.
Once you locate the knob, you are then going to begin to go through the speed settings.
2. Flick Through The Speed Settings
For the most part, you are going to have a few options when it comes to the speed with an Ariens snowblower.
Don’t rush while flicking through.
You will want to turn the knob and then look at the symbol in front of you. This is going to let you know which way to turn the knob when looking to increase or decrease the speed. Follow this to get it right the first time.
You are then going to take the time to be patient when it comes to managing the speed setting as best as possible.
It’s essential to figure out the various speeds and how they are going to impact your snow-blowing experience.
Don’t assume one speed is going to work well just because it seems like it is faster. This is not always going to work out because of how much snow is on the ground.
It is okay to go with a lower speed setting when there is less snow on the ground.
3. Test The Snowblower
Now, it is time to test the snowblower.
In essence, you are going to want to have the setting in place and then begin to work on the snowblower. This is the best way to make sure the snowblower works well and you get the results that you are hoping for.
Take your time when using the snowblower.
You have to understand what’s required to get the snowblower to work well. If you don’t do this, the snowblower is not going to run properly.
4. Continue Making Adjustments (If Necessary)
You will now want to start making adjustments.
If you are not making adjustments, you will not see appropriate results. This is a common mistake that is made because it is not always right to go with one speed setting and then assume this is enough.
The Ariens snowblower is going to break down if that is the strategy you wish to employ.
You will want to take a step back and continue to respond to how the snowblower does in front of you. This is a must.
It’s best to go through these details as you figure out how to adjust the speed on an Ariens snowblower.
To adjust the speed on an Ariens snowblower, start by finding the knob on the handlebar. This is what controls the speed. Now begin turning the knob left or right to change the speed. Always change the speed based on the conditions. If it is deep snow, a higher speed setting will do better.
It is important to be ready to adjust the snowblower in these conditions.
This is how you are going to get the snowblower to work well and it is not going to break down on you. A lot of snowblower owners rush this part of the process and then regret it later when the machine does not work.