How To Blow Out Pool Lines With Shop Vac (Solved)

When it is time to start clearing out the pool lines, you will want to use tools that will work instantly.

You will also want to make sure the solution is safe and is not going to damage the lines. If that is what you are aiming for then it is best to consider a shop vac for blowing out pool lines.

This includes learning how to blow out pool lines with a shop vac.

To blow out pool lines with a shop vac, place the shop vac on the exhaust and put the hose on the valve. Next, begin blowing in and pay attention to what comes out of the skimmer. Do not stop until only air is coming out.

This is going to take a few minutes but it is one of the fastest ways of blowing out the pool lines.

This guide is going to point out what you will want to do as you figure out how to blow out pool lines with the shop vac.

Steps On How To Blow Out Pool Lines With Shop Vac

1. Place Shop Vac On The Exhaust

The first step is to position the shop vac.

You will want to make sure it is in the right place and it has enough space to work. It is going to generate the airflow, which is what will be used to push out everything in the pool lines.

In general, you will want to set up the shop vac on the exhaust.

This is going to make sure it will work as you want it to.

As you are thinking about clearing out the pool lines, you will find a few options in front of you. Some will be safe and others are not going to be as effective.

The right placement of a shop vac is a good starting point for doing things the right way.

2. Put Hose On The Valve

Now, you are going to focus on the hose.

The hose has to go on the valve for the air to be pushed inside. This has to be a complete fit or you are not going to generate enough airflow to clear out the pool lines.

Be patient while setting up the hose and make sure it is in the right spot. This is how you are going to keep it as safe as you want it to be.

Think about this and the hose is not going to budge.

Once the hose is in place, you will know the airflow is going to be in line with what you want.

3. Start Blowing Air

Think about what you need to do when it comes to blowing air.

You will need to generate enough airflow to make sure the air clears out. This is the only way to see good results and make sure it turns out as you want it to.

The goal here is to make sure enough air is getting through where it will clear out the pool lines within minutes.

It’s important to let the shop vac do its job.

If you have it set up the right way, it is going to push air inside and will continue to clear out the pool lines as required.

4. Make Sure Only Air Is Coming Out Of The Skimmer

You will want to make sure to pay attention to the skimmer as this is the most important part of clearing out the pool lines.

Why are you going to be looking at the pool skimmer?

The premise is to make sure only air is coming out of the pool skimmer by the end of the process. Until then, you are going to notice water coming out and that is a sign you still need to keep using the shop vac.

When only air is coming out, this is when you will know the job is done and you can put away the shop vac.

To make sure it has cleared out, you can turn off the shop vac for a few minutes and see what comes out.

Final Thoughts

When figuring out how to blow out pool lines with a shop vac, you will need to use the tips mentioned in this guide.

To blow out pool lines with a shop vac, it’s best to place the shop vac on the exhaust and the hose on the valve. Once done, start blowing out the line and make sure to look at the skimmer until only air is coming out. This will indicate the pool lines are cleared.

You will need to be attentive during this process to make sure the pool lines are in good shape.

Do not rush this process and make sure to turn off the shop vac when only air is coming out. This will let you see if more work has to be done on the pool.