Cutting the ends of a pergola is all about precision and understanding what the process entails.
You will want to acquire the right materials and then pinpoint how you are going to want the pergola ends to look.
This makes it easier to come up with a plan when cutting the pergola ends. It’s best to learn how to cut pergola ends by focusing on the result you’re going for.
To cut pergola ends, start by marking the beams where they’re going to be cut. Next, set the beams on a stable surface and use a circular saw to cut where the marked lines are. Once the beam is cut, grind down the end to ensure it’s smooth.
You will always want to make sure to grind the end after cutting through it. Otherwise, it is going to be unstable and it will not look as clean as you want it to be.
The advice here is going to make it easier on you as you learn how to cut pergola ends.
Table of Contents
Steps On How To Cut Pergola Ends
1. Set Up Marks On The Beams
You will want to take the time to set up the marked lines on the beams.
If you are not taking the time to set up marks on the beams, you will not know where to cut them. This becomes a real concern when it is time to focus on what will work and what won’t.
Set up the marks on the beams and ensure they are equal.
This is where you are going to be cutting.
When you are doing the marking, it has to be completed with thorough measuring. This is the only way the cut is going to be as clean as you want it to be.

2. Set Beams Into A Secure Place
You will also want to set the beams in a secure place.
What does this mean?
Pergola beams are heavy and they are going to be thick to cut. This means you are not going to want to just set them anywhere and begin sawing as that will not work.
Instead, you are going to want to set the pergola beams on a stable surface. This can be anything where you are going to have enough space to push the circular saw through the beam without making contact with anything else.
Look around for a stable surface and then rest the pergola beam on this before beginning.
Doing this is going to set the foundation for how you are going to want things to be done. It’s important to be diligent when you are working on the pergola beam and a stable surface is a good starting point.
3. Cut On The Marked Lines Using A Circular Saw
You are now going to have a pergola beam that is marked up and ready to be cut.
So, how are you going to cut it? What are you going to use?
In general, you are going to want to use a saw. A circular saw is going to do well because it will cut through the beam cleanly and it is going to be as precise as you want it to be.
You do not want cuts all over the place when working on the beam.
It should be clean as that is how you are going to get the pergola to turn out as you wish for it too.
4. Grind The Edges To Smooth Them Out
Now that you have cut the pergola ends, it is time to start thinking about refining the beams that are in front of you.
You will want to grind the edges.
Why are you going to do this?
The premise behind this is to make sure the edges are smooth and as clean as you need them to be. If you are not taking the time to do this, the edgework is not going to be in tune with what you are hoping for and this will take away from how effective the pergola ends are.
These are the details that matter.
You need to make sure the edges are ground down to the point where everything is as seamless as it needs to be.
Final Thoughts
Look at this guide as you learn how to cut pergola ends.
To cut pergola ends, you are going to use a circular saw. This will be done after measuring where the cuts have to be made and then creating marks on the beam. Set the beam on a stable surface and then cut through using the saw. Once done, grind down the edges to make sure it is smooth.
This is how you are going to get the pergola ends to turn out the way you want them to.
If you are not doing this, you are not going to get the pergola ends to turn out as required. This becomes a real concern for those who want to see appropriate results.