When a pool pump is damaged, this is not a good sign and it can lead to significant issues when it comes to the overall quality of the pool pump.
You will have to check on the integrity of the pool pump housing and ensure there are no cracks in it. If there are cracks in the pool pump, you are going to have to address them as soon as possible.
This includes learning how to fix a cracked pool pump housing as soon as you can.
To fix a cracked pool pump housing, it’s best to drain the pool pump and begin assessing the crack. Once done, it’s time to fill that crack with epoxy. Wait a few hours for it to dry and then test the pool pump by letting it run for a bit.
When you are working on the pool pump, always remember to turn off the power supply. This is going to ensure things work out safely and you do not compromise your health along the way.
Here is advice on how to fix a cracked pool pump housing the right way.
Table of Contents
Tips On How To Fix A Cracked Pool Pump Housing
1. Drain The Pool Pump
Before you begin fixing the cracked pool pump housing, it’s best to drain the pool pump.
You will also want to turn off the power supply running to the pump. This is going to make sure you don’t get shocked when you are working on the fixture.
It’s also important to drain the pool pump to ensure water does not get in the way. This is going to help set a seamless process that is going to be easy to manage when you are working on draining the pool pump carefully.
Your best option is to drain the pool pump and make sure it is cared for the right way. As long as you are doing this, you are going to see good results and it will turn out as required.

2. Inspect The Crack
Now that the pool pump is ready to be repaired, you are going to start looking for the crack in the pool pump housing.
It is important to find the crack as that is how you are going to ensure it is highlighted and then repaired as soon as possible. You do not want to delay this when it comes to doing things the right way and getting the type of results that you are hoping for.
You will want to inspect the crack in greater detail to see how much epoxy is going to be required to fill it.
This is good information to have so you are not taking a risk when it is time to set things into motion.
3. Fill The Crack With Epoxy
You will want to make sure to fill the crack with epoxy.
This is one of the mistakes people make and it’s not good for those who are attempting to keep things as organized as possible.
You will want to assess your options and ensure you are filling the crack carefully. This includes assessing your options and seeing what is required to make the pool pump housing as robust as possible.
The epoxy is going to hold well and is going to last a long time too. The one thing you do have to care about is letting it dry. This is a must.
4. Wait A Few Hours Before Testing The Pool Pump
When you are done applying the epoxy in the crack, it’s time to let the process unfold as required.
The epoxy is going to come with specific instructions on how long you should let it dry. This is key because a pool pump is going to be interacting with water right away.
You cannot let the pool pump run until the epoxy has dried. This is essential for it to work or the crack is going to form again.
It’s essential to wait a few hours before testing the pool pump to get things right.
Final Thoughts
When you are dealing with a damaged pool pump, you will want to use these steps to find out how to fix a cracked pool pump housing.
To fix a cracked pool pump housing, it’s recommended to drain the pool pump, inspect the crack, and then fill that crack using a robust epoxy solution. Let the epoxy settle and dry for a few hours and then look at turning on the pool pump.
This is key for those who are trying to set things into motion the right way and do not want to compromise on how things turn out.
You will want to take the time to look into this and make sure the pool pump works as required. If you do this, you will see good results with the pool pump.