How To Get Bigger Flames In Gas Fire Pit (Solved)

One of the challenges when it is time to look at how the gas fire pit works is to see if the flames can be improved.

A lot of mistakes are made when the flames in the fire pit are too small.

You will want to figure out how to get bigger flames in the gas fire pit.

To get bigger flames in a gas fire pit, turn off the gas, remove debris from the fire pit, and then clean the holes using a brush. Once done, turn on the gas and test the fire pit to see how the flames are.

One of the main issues that lead to smaller flames in the gas fire pit has to do with a minor blockage of the holes. This is what gets in the way of how the flames turn out.

Your best bet will be to brush away the debris and then see if this leads to bigger flames in the fire pit.

This article is going to showcase how to get bigger flames in a gas fire pit the right way.

Steps On How To Get Bigger Flames In Gas Fire Pit

1. Turn Off The Gas

You will want to keep things safe and turn off the gas.

This can be done with the gas valve.

You do not want to attempt to clean the gas fire pit with the gas on because it’s dangerous. It is also not going to let you dig deeper into the fire pit to see what’s going on.

Since you are going to be clearing the holes in the fire pit, you do not want the gas running into the fire pit.

This should be a habit you get into when maintaining the gas fire pit at home.

Turn off the gas supply and then see what is going on with the fire pit. This will let you do things safely.

2. Remove Debris In The Fire Pit

You are now going to remove debris that is found in the fire pit.

Most people are going to rush to the holes in the fire pit to see how they can be cleared up. Yes, these are important but that is just one step.

You are going to have to remove the debris in the fire pit as carefully as you can.

Do not let it get to the point where the debris collects in the fire pit and gets worse. This is going to impact how well the gas fire pit works and it is something you are going to want to avoid.

Most of the debris is going to be easy to pick out of the gas fire pit and that should be a priority for you during the cleaning process.

3. Clean The Holes Using A Brush

You are now going to clean the holes using a brush.

The purpose of doing this is to see how the holes are working when it comes to getting the flames to rise.

It is common for debris or residue to settle on these holes and block how they work. This is a sign you will need to do a bit of cleaning on your end.

If you take the time to get a good brush, you will find it easy to wipe away the residue. This is going to open up the holes.

When the holes are open, the flames are going to get bigger in the fire pit as intended.

4. Turn On The Gas And Test The Fire Pit

The last step is going to be to turn on the gas in the fire pit.

The purpose of doing this is to make sure what you have done is going to lead to bigger flames in the fire pit. Until you do this, you will not know what has worked and what has not.

Take your time to see how well the gas fire pit does.

If the gas fire pit is working well, you will want to get a read on how to get more out of the gas. This is going to be seen through the flames and their size.

If the flames are still too low, you will want to dig deeper into the holes by going through the cleaning process again.

Final Thoughts

These are the main steps on how to get bigger flames in the gas fire pit.

To get bigger flames in the gas fire pit, turn off the gas, remove any debris in the fire pit, and then brush away residue in the holes. Once done, turn on the gas supply and see if the flames are bigger now.

In most cases, the flames are going to be larger and you are going to be good to go.

This is key when it comes to managing a situation where the flames are not big enough.