When it is time to start working on the RV fresh water tank, you will want to make sure there’s ample water inside.
There is a desired amount that is going to have to be managed when it is time to begin working on the RV fresh water tank the right way. A lot of mistakes can be made in this regard and that’s what you will want to avoid.
If you are not figuring out how to gravity fill the RV fresh water tank, you could create a problem with how things turn out.
To gravity fill an RV fresh water tank, connect the water hose to the port, start filling the water, and keep an eye on the water pressure. The last step is to lock the cap and make sure it does not leak water.
It’s essential to be diligent with how you are securing the cap once you are done. If it remains loose, this can create trouble later.
The same goes for the process when you are connecting the water hose to the port.
This article is going to shed light on how to gravity fill the RV fresh water tank.
Table of Contents
Steps On How To Gravity Fill RV Fresh Water Tank
1. Connect The Water Hose To The Port
You will want to take the time to connect the water hose to the port.
This is the first step.
The port is going to be situated on the RV’s side. You will want to locate this port and then make sure there is ample access to it for the water hose.
This means clearing out the space and making sure there is no debris where the port is. With older RVs, this might take a bit of time to manage along with how the RV is positioned. Make sure there is nothing in the way.
When it is time to begin working on the port with the water hose, you are going to take off the cap. This is going to give you access to the port for the water hose.
At this point, you can connect the water hose to the port.
2. Start Filling The Water
You will want to begin filling the water.
Now, this is a part of the process that is essential but that does not mean it will be easy. You will have to pay attention to how much water is going into the RV water tank.
You do not want to overfill the tank.
At this point, you will want to start filling the water and then keep an eye on the water pressure as stated in the next step. If you focus on this, the water is going to end up the way you want it to be.
3. Keep Eye On The Water Pressure
You will want to keep an eye on the water pressure.
The water pressure is essential when it comes to managing the situation and keeping things as clean as possible.
The water pressure reading will state how much water is in the RV and whether or not it is good for the RV water tank. You will want to keep tabs on this reading and follow what is stated in the manual.
For those who don’t do this, it can create a situation where the RV fresh water tank gets damaged or overfilled. Don’t let this happen and focus on what can be done to keep it in good shape.
4. Lock The Cap
You will want to lock the cap.
This is one mistake that’s made by people.
You will want to look at taking off the water hose as soon as the job is done and then lock the cap where the port is.
This is the only way to ensure it stays safe and you don’t create a situation where a lot of damage is done for no reason. This can also be the leading cause of a leak when it is time to manage the RV water heater or the fresh water tank.
Final Thoughts
These steps will make it a breeze as you find out how to gravity fill the RV fresh water tank.
To gravity fill the RV fresh water tank, start by connecting the water hose to the port on the side and then start filling it with water. Always keep an eye on the water pressure reading while filling the tank and then lock the cap once done.
It’s easy to make mistakes during this process but the right approach will make a difference.
It’s essential to be patient and ensure you are filling the RV fresh water tank the right way. For those who are not doing this, you are going to remain a step behind and it will not work out as you want.
