Fire pits are supposed to be moisture-free and that does not always happen.
Most fire pit owners are going to want to build a protective barrier around the fire pit to ensure nothing gets inside.
This is not always possible, which is why issues start to arise. Your best bet is to find out how to keep water from pooling in the fire pit.
To stop water from pooling in the fire pit, raise the fire pit’s height, set up a comprehensive drainage system, and pour gravel into the base to help eliminate excess moisture.
This is the best way to make sure water does not sit in the fire pit for long periods.
Depending on how low the fire pit is, you are going to have issues such as these arise. You will want to be focused on finding out where the water is collecting in the fire pit and how to take it out.
This guide is going to showcase how to keep water from pooling in the fire pit.
Table of Contents
Steps On How To Keep Water From Pooling In Fire Pit
1. Check Where The Water Is Pooling In The Fire Pit
Before you start finding ways to keep water out of the fire pit, you need to pinpoint where it’s pooling.
It is common for specific areas in the fire pit to be worse off than others.
You will want to pinpoint those areas and then begin to work on a noticeable solution. This works because you will find it easier to work on those areas as much as you can.
If it is collecting in all parts of the fire pit then you will know this is a consistent problem that will only get worse. You will want to find a way to elevate the fire pit and get it to the point where water does not pool inside.
This is going to require a bit of planning but it will be a worthwhile investment of your time.
Water should not be collecting in the fire pit as it will become much harder to manage with time.
You will want to find out how to get the fire pit to sit higher. As long as you do this, you will know the fire pit is not going to get ruined and the water is going to drain from the bottom as soon as it enters the fire pit.
Most people don’t know how high to raise the fire pit.
However, even a few inches is going to be good as long as the drainage system is effective. Look at this solution and watch as it helps remove water from the fire pit.
3. Set Up Drainage
The drainage system has to be impeccable with a fire pit.
To do this, you are going to want to work on adding a tiny drain hole at the bottom. This is going to help create an outlet for the water that does go into the fire pit.
It is hard to regulate water going into the fire pit but you can make sure it leaves right away.
This is why the drainage system is going to be a success.
it will help push the water out and make sure it does not pool inside the fire pit for long periods.
4. Add Gravel To The Fire Pit
You will also want to think about what is added to the bottom of the fire pit.
Most fire pit owners will be given two options in a situation such as this.
You will either want to have sand at the bottom of the fire pit or look at adding gravel. Both are effective solutions and will make sure the water does drain out of the fire pit as required.
It is a material that is not going to let the water sit in the fire pit.
Gravel is great because it is easy to set up in the fire pit and is going to provide peace of mind.
Final Thoughts
Look at the advice listed here as you learn how to keep water from pooling in the fire pit.
To keep water from pooling in the fire pit, start by increasing the fire pit’s height, adding gravel to the bottom, and making sure there’s a drain hole in place. This will help push the water out from the bottom of the fire pit.
You have to make sure water is not collecting in the fire pit because this will make it difficult to use.
A lot of fire pit owners don’t think about this until their fire pit stops working properly.
Don’t let this happen as this is a fire pit mistake that is not easy to recover from when you are using the fire pit.
