The RV awning is one of those elements that will need to be used outdoors.
You will want to make sure it’s intact and continues to last as long as you need it to. Unfortunately, it’s possible for the RV awning to lose its shape or not stay on track.
With this in mind, it becomes important to learn how to put the RV awning back in track.
To put the RV awning back in track, start by spreading the fabric to remove wrinkles. Next, clean the fabric by removing all debris and then line the front of the fabric with the start of the track by stretching it out. Now, push the fabric into the track and then do the same all the way across.
This is how you are going to get the RV awning to remain in place.
Please note this is assuming the RV awning is not damaged. If the fabric is torn, it will need to be replaced. Otherwise, following these steps will be enough to get the RV awning back on track.
Look through this guide as you figure out how to put the RV awning back in track.
Steps On How To Put RV Awning Back In Track
1. Spread The Fabric
You have to make sure to start by working on the fabric.
It’s a common mistake for people to make.
You will begin to put the RV awning back without prepping the fabric. Don’t let this happen and always make sure you are spreading the fabric as well as you can.
You will want to do this by stretching the fabric and making sure it’s as robust as you need it to be. This includes assessing the quality of the fabric and how intact it is.
Look at this and then figure out what will have to happen as you are pinpointing what your options are. You will want to spread the fabric and make sure it is not torn.
If it is not torn, you can then move to the next step. Otherwise, it will have to be replaced.
2. Clean The Fabric
You will want to clean the fabric.
The RV awning can collect debris over time. This is common and it is something you are going to want to address right now rather than waiting for when the fabric is back where it needs to be.
The idea is this is the best chance to clean the fabric. It will also allow you to control the fabric better and that is never a bad thing.
You will want to clean the fabric and make sure you are working on it the right way.
3. Line The Fabric With The Start Of The Track
You will want to line the fabric with the start of the track.
It’s a common issue where people are not lining the fabric and just start putting it from the middle of the track.
This is not going to work.
You have to take the time to line the fabric with the beginning of the track. This is where you are going to want to line up the fabric and then push it in.
It will become a lot easier once you have this part of the RV awning in. Otherwise, it is not going to remain lined up as required.
4. Push And Secure The Fabric In The Track
You will want to now begin working on the rest of the fabric.
Since the fabric is already set up at the beginning of the track, you are now going to want to start pushing the rest of the fabric into the track.
This should be done without letting the fabric lose its shape. This means keep it stretched or wrinkles will develop where they should not.
If you do this to push and secure the fabric, you are going to get things to work a lot better. Focus on this when you are managing the track and ensuring things are done the right way.
This is all you need to know when finding out how to put an RV awning back in track.
To put an RV awning back in track, it’s important to stretch the fabric and make sure it’s not torn. Next, clean the fabric and then line it up with the beginning of the track before pushing it in. Once done, continue across the rest of the track while keeping the fabric stretched.
This will ensure the RV is set up the right way and the awning looks as required.
If you don’t focus on this, the RV awning is not going to look good. It is going to take away from the RV and that is the last thing you will want.