When an above ground ladder is set up, it’s going to require a bit of care.
During the summer, you are not going to find this to be difficult. It is going to be all about cleaning the above ground ladder in the pool and ensuring it’s in great shape.
It’s important to manage a situation where the pool ladder is removed the right way. This includes learning how to remove the above ground pool ladder.
To remove an above ground pool ladder, start by unscrewing the ladder. Next, take off the steps one by one and then move onto the rails. Each one will come out and then it’s time to drain the water into the pool. At this point, it should be disassembled and easy to store.
The hardest part of the process is to make sure you are unscrewing the ladder without ruining it. This means being patient and taking the time to gently work on the ladder. As soon as you do this, you will find it easy to take off the steps.
This article is going to take a look at how to remove an above ground pool ladder.
Table of Contents
Steps On How To Remove Above Ground Pool Ladder
1. Unscrew The Ladder
You will want to start with the screws.
It is essential to find the screws that are holding the above ground pool ladder in place. This is going to take a bit of time as you will want to make sure you are working on each screw and then keeping it aside for next time.
Do not toss the screws out.
It’s possible for there to be a clip that is going to be holding the ladder to the pool. This is going to depend on the design and you will want to take a look at those connection points to see what’s going on with the ladder.
Always unscrew the ladder to make sure it’s removable as that is how you are going to begin to work on the rest of the fixture.
2. Take Off The Steps
Now you are going to start to take a look at the steps.
There are going to be numerous steps with the above ground ladder and that is where your attention is going to go. You will want to begin to take off each step and this is going to depend on the ladder’s design.
You will want to do this by unscrewing the steps.
This is going to include each screw being managed with the help of a screwdriver or drill. You are then going to want to look for a clip that might be holding the steps.
Focus on this and then the ladder is going to come off as soon as you want it to.
3. Drain The Water
It is common for there to be water on the ladder.
This is something that is going to happen due to the nature of an above ground pool ladder. You will want to take the time to shake the ladder and make sure the water is out.
Do not store the pool ladder with the water in it as that might damage it over time depending on the temperature of the storage area.
Focus on draining the water and then take the time to figure out what can be done to reduce the amount of stress that is put on the ladder when it is stored.
4. Remove The Rails
It is also important to remove the rails just like you did with the steps.
You are going to do this by finding the screws that are holding the rail to the pool. You are going to unscrew it and that is going to cause the rails to come off.
You will want to set aside the rails and then see how the pool responds.
It is important to think about this and make sure you are careful with how you are disassembling the pool ladder.
To remove an above ground pool ladder, start by unscrewing it and disconnecting it from the main deck. Next, unscrew each step and make sure it’s unclipped before setting it aside. The same should be done for the rails. At this point, the pool ladder can be drained, and then it will need to be stored.
Always remember to prepare the pool for the winter and this is one way to do so. If you want to store the pool ladder, it is best to go through the steps here.
