How To Reset Carbon Monoxide Detector In RV (Explained)

A carbon monoxide detector is integral for the safety of anyone in an RV.

You do not want a situation where the camper carbon monoxide detector is beeping and you are ignoring it. This is why it is important to understand how to reset the carbon monoxide detector in an RV.

To reset the carbon monoxide detector in an RV, press the “Test/Reset” button and hold it for 5-10 seconds until there’s a sound. This will initiate the resetting process. Once done, test the carbon monoxide detector to ensure it’s working.

It is important to take the time to wait until the carbon monoxide has gone through the resetting phase to see if it needs to be replaced.

If the detector is old, you will likely have to replace it and the resetting phase is not going to get it to work.

This guide is going to show you how to reset a carbon monoxide detector in an RV.

Tips On How To Reset Carbon Monoxide Detector In RV

1. Push The Test/Reset Button

The resetting process for a carbon monoxide detector is straightforward.

There will be a “Test/Reset” button on the detector.

You will want to find it and make sure that it is accessible from where you are. In some RVs, the button might not be accessible unless you take it off but this is rare.

Instead, you will want to look for the button that is going to be along the side of the detector or right on the front. Manufacturers do not hide this button as it should be accessible.

You will want to take the time to find this button and then prepare to reset the carbon monoxide detector in an RV.

2. Wait 5-10 Seconds For The Beep

You will need to press and hold the button for 5-10 seconds.

This is going to help let the carbon monoxide detector know that you want to reset it. If you press it for a second, it is just going to test the carbon monoxide detector to ensure it is working.

You will do that later in this process.

For now, you are going to wait 5-10 seconds while holding the Test/Reset button. This is going to help initiate the resetting process for the carbon monoxide detector in your RV.

In general, there will be a beep or a sound that is going to come when the resetting phase is initiated. You will want to wait for this before letting go of the button.

3. Wait For The Carbon Monoxide Detector To Reset

At this point, you will have heard the beep or sound that comes when the reset button has been held for 5-10 seconds.

This is a good sign that the resetting is commencing.

You will now want to show patience and let the carbon monoxide detector go through the necessary steps needed to get it to the level it needs to be.

You will not want to rush this process and it is best to not touch the detector as it is going through this phase. Just let it go through the process and then wait until it turns back on.

This is not going to take more than a minute and the carbon monoxide detector will be back to how you want it to be.

4. Test The Carbon Monoxide Detector

When you have completed the resetting of a carbon monoxide detector in an RV, you will want to now make sure it is working as desired.

Don’t just leave the carbon monoxide detector without testing it.

You don’t want to do this because it is possible the resetting didn’t work and you still have a detector that is not going to work when you need it the most. Do not take a chance and make sure to test the carbon monoxide detector in your RV.

So, how are you going to test the detector?

You are going to do this by pressing the same button as you did to reset the detector. This time you are only going to press it for a second.

This will let you test the detector to see if it beeps and works. If there is power in the RV, it will work.

Final Thoughts

Look at these steps as you learn how to reset the carbon monoxide detector in an RV.

To reset the carbon monoxide detector in an RV, you have to press and hold the “Test/Reset” button for 5-10 seconds. When you hear the beep, this is a sign the detector is functional and is going to reset. Wait for it to reset and then test the detector to make sure it’s working.

This process should take no more than a few minutes to complete. It’s important to make sure the RV battery is working during this process too.

Always make sure to test the carbon monoxide detector in the RV to ensure it is working. You do not want to have a malfunctioning carbon monoxide detector as that will lead to major RV safety issues when you are on the road.