When you attempt to start up the Husqvarna leaf blower, it’s common to hope the pull cord is going to move as you want it to and it’s not going to remain stuck.
In some cases, you will attempt to yank at the cord and it is still not going to move the way you want it to.
This creates a situation where you have to be careful and make sure you are working on a way to fix a Husqvarna leaf blower pull cord that’s stuck.
If the Husqvarna leaf blower pull cord is stuck, start by removing the pull starter housing and assessing the cord for potential tangles. If the cord is damaged, remove it using pliers, and then insert a replacement cord into place.
In most cases, the cord will have a few tangles in it, which can be fixed by removing the cord and putting it back into place.
You will have to be the judge of this based on the condition of the cord in the Husqvarna leaf blower.
This guide is going to look at how to fix a Husqvarna leaf blower pull cord that’s stuck.
Table of Contents
How To Fix Husqvarna Leaf Blower Pull Cord That’s Stuck
1. Remove The Pull Starter Housing
The first thing you are going to do to fix the Husqvarna leaf blower pull cord is to assess the housing it is situated in.
The reason for doing this is to get a proper look at the cord to see its condition.
If the cord is not in good shape, you will want to assess it from top to bottom. This is the best way to make sure the pull starter works as you want it to and you do see tangible results.
The pull starter housing is going to come off and you will then get a look at the cord inside. Put aside the housing and make sure you are taking a detailed look at where the cord is and why it won’t pull as you want it to.
2. Check For Tangles
When the pull starter housing is out of the way, you will now want to begin assessing for tangles.
The tangles that you are dealing with can become the reason it does not pull properly. You will have to remove the pull cord if this is the case and then insert it back into place or it will not work.
The tangles are going to get worse with time, so you have to be diligent about how you approach this and what is done to get things back into place.
If it is a few tangles, you should be able to fix the cord in the Husqvarna leaf blower.
If it is more significant, you will have to replace the cord after pulling it out.
3. Replace The Cord
It’s important to know when to replace the cord in a Husqvarna leaf blower.
A lot of people don’t do this and that creates a scenario where the leaf blower refuses to start and the tangles only get worse.
You don’t want this to happen.
You will have to make sure to take out the cord with the help of pliers. When you use pliers, the cord is going to come out easily and you will feel good about how quickly it’s going to come out too.
Do not damage the surrounding components while doing this.
4. Re-Test The Pulling Mechanism
The last step is going to be to put the new cord in.
You will want to make sure it is connected properly and it is going to move freely when you pull on it. Remember it is possible to end up with tangles as soon as you install the new cord in the Husqvarna leaf blower, which is why you have to be patient.
Do not rush this part of the process.
You are going to put the new cord in and then the pull starter housing. This is going to let you test the pulling mechanism once you are sure it is in.
These are the steps that will work when it is time to repair a Husqvarna leaf blower pull cord that’s stuck.
To repair a Husqvarna leaf blower pull cord that’s stuck, it’s best to start by removing the pull starter housing, checking the cord for tangles, and assessing whether or not to remove it. If the cord is damaged, remove the cord.
This is the best way to make sure the cord comes out as you want it to.
If you are not doing this, you will not feel good about how well the pull cord is going to work and this will only get in the way of what you are doing.
Start with the tips here to see what has to happen to get the leaf blower to work.