You can’t have a situation where the pool pump breaks down and/or starts creating issues that are hard to manage.
Pool owners will often want to set up the pool pump and then continue to run it without understanding how it is handling the amount of pressure that’s put on it.
This is when it is time to figure out why the Intex pool pump keeps getting air in it.
The Intex pool pump keeps getting air in it due to damage to the suction or return lines. It’s also possible the pool skimmer is leaking, which leads to air entering the pool pump. To fix the issue, restore the damaged line(s), reduce the water level in the pool, and make sure the pool pump lid is not cracked.
For the most part, the air gets into a pool pump when there is damage to one of the lines. This is why you have to keep tabs on this part of the pool to ensure the pool pump continues to run as it is supposed to.
Here is what you have to think about as you figure out how to fix an Intex pool pump that keeps getting air in it.
Table of Contents
Tips On How To Fix Intex Pool Pump That Keeps Getting Air In It
1. Inspect The Suction Lines And Skimmer
Start with the suction lines.
This is one of the biggest hurdles a person has to deal with when it comes to the amount of pressure being put on the suction line.
If you are not taking the time to focus on what’s happening with the suction line, it’s possible for there to be an air leak in the pool pump.
Look at analyzing the suction line to see whether or not it is damaged. This could be a small crack in the suction line that is causing air to enter the Intex pool pump.
To remove air from an Intex pool pump, you have to seal this part of the pump to make sure it is stable. Another part that might need to be fixed will be the pool skimmer.
The pool skimmer may be starting to show signs of damage and that is creating issues with how it is performing.
2. Look For Air Leak In The Return Line
Is there an air leak in the return line?
Most people will look at the pool pump and focus on the suction line. Yes, it is more common for the suction line to have damage to it, but that does not mean it is the only part that is going to get damaged with time.
It’s also possible you have an air leak in the return line that has to be corrected. Until you do this, you are not going to see the type of results that will matter over time.
3. Reduce The Water Level
In some cases, the pool water level is going to be too high.
When the pool water level is not stable, this is going to cause air to enter the pool pump. The pump is going to be working hard with the additional water and that is going to cause air to flow in.
You need to stabilize the water level to make sure this does not happen.
Otherwise, the pool pump is going to continue to bother you and is not going to work out as required. Keep this in mind when you are figuring out what is required to keep the pool pump in good shape moving forward.
4. Re-Install The Pool Pump Lid
Have you taken the time to re-install the pool pump lid?
When the pool pump lid gets damaged or loses its stability, you are going to have a situation where too much air comes into play.
This is not a good sign.
You have to ensure the pool pump lid is being set up carefully. This is the only way you are going to make sure the pool pump continues to run as required and remains as stable as possible.
Final Thoughts
It’s essential to think about all relevant options when it is time to move forward with an Intex pool pump that keeps getting air in it.
If the Intex pool pump keeps getting air in it, it’s recommended to check the pool pump lid for damage and ensure both the suction and return lines are stable. If one of these parts is damaged, it’s best to repair or replace them. It’s also recommended to reduce the pool water level.
This is how you are going to stop the pool pump from malfunctioning and it’s going to remain stable.
Until you look into this, the pool pump is not going to work as required.
