Using a log splitter should be straightforward but there are situations where it’s not going to function properly.
This creates a situation where the log splitter begins to fade.
If that is the case, you are going to have a log splitter that starts and then dies.
If a log splitter starts and then dies, start by checking to see if there’s enough fuel in the tank. Next, inspect the spark plug and see if the air filter is clogged. The last step is to see if there’s enough oil in the log splitter.
These are the most common reasons for a log splitter not starting properly. If you take the time to check the fuel and oil in the log splitter, you are going to have a much better chance of it lasting as long as you want it to.
This article is going to look at how to fix a log splitter that starts and then dies.
How To Fix A Log Splitter That Starts Then Dies
1. Check The Fuel And Oil
The one issue you will have to face with a log splitter that does not start right away has to do with fuel.
If there is not enough fuel in the log splitter, it’s not going to start.
This can become a real concern if there is underlying damage to the fuel line. You will want to see how much fuel is in the log splitter before rushing to conclusions about the fuel line. Always start with the basics and that is going to include the amount of fuel in the log splitter.
Once you have checked the fuel, you are now going to move over to the oil.
This is going to let you take a look at how much oil is in the fuel and then see if there is a way to control things moving forward.
You will want to keep tabs on this to ensure things are done the right way.
You have to make sure there is enough oil in the log splitter just like you check the fuel. This is a must to make sure it is working the right way and everything is in the right condition as it needs to be.
2. Look For Clogging In The Air Filter
Have you taken the time to take a look at the air filter?
This is another concern that is going to have to be on your mind when a log splitter starts and then dies. This a sign there is something wrong with the amount of air that is being pushed through and that is going to come down to the filter.
You do not want a situation where there is clogging in the air filter.
Look into this and make sure you keep tabs on how things are being done when it comes to the air filter.
3. Inspect The Spark Plug
You will also want to take a look at the spark plug.
This is an integral detail when it comes to how the log splitter begins. If it is not starting the right way, you will realize it has a lot to do with the amount of power that is going through to the log splitter for it to start.
The ignition system might start giving you trouble and that is when you will want to have one eye on the spark plug.
This is responsible for helping the log splitter start and this won’t happen until you take the time to look at whether or not the spark plug is running as it should. If it is not, replace the spark plug in the log splitter.
The one thing you are not going to want to do is keep using the log splitter in its current condition. This is going to cause other parts to fade out and that is not good for how things turn out.
You will want to take the time to focus on the spark plug and see what happens when it is time to kick things into motion.
These tips will help if a log splitter starts and then dies.
If a log splitter starts and then dies, it’s best to look at whether there is enough fuel and oil in the tank. Next, check the air filter for clogging and see if the spark plug has died. These are the most common reasons for a log splitter not starting the right way.
You will want to take a look at the make and model you are dealing with to see where these parts are and how they need to be managed.
Look to go through these steps as it is the only way to get the log splitter to run as you want it to or it will not start.