Log Splitter Is Weak (Fixed)

If the log splitter is not functioning at the level it needs to, you will have to get creative in figuring out what is going on with the machine.

Log splitters are powerful tools but they need to be running optimally for this to happen.

The one issue people report is when the log splitter is weak.

If the log splitter is weak, it’s likely a leak in the hydraulic system or low hydraulic fluid. Top up the fluid and make sure there’s no leak to fix the issue. Additional reasons can include a loose hose or a damaged cylinder.

For the most part, you will want to pay attention to the hydraulic fluid in the log splitter. This is where the problem is going to stem from and what you will need to concentrate on.

Your best bet is to always look at what your options are when it comes to figuring out what is going on with the weak log splitter.

This guide is going to pinpoint some tips that will help you fix a weak log splitter.

How To Fix A Log Splitter That’s Weak

1. Look For Leak In The Hydraulic System

When the log splitter is not building pressure, you will need to pinpoint where the leak is.

It is the leak that is going to be a real troublemaker for you.

It is common for people to not notice the leak until the fluid level goes down. This is why you will want to keep tabs on the amount of fluid in the log splitter to see whether or not this is the issue.

If you just topped up the fluid in the log splitter, this is likely the reason and what you are going to have to address as soon as you can.

If there is a leak, it is going to be near the tank. This is where you are going to have to inspect. Look for any type of liquid that is coming out.

When the fluid level goes down in a log splitter, you are going to notice a drop in performance too. This is why you have to be quick to react instead of avoiding the situation.

2. Fill The Hydraulic Fluid

You will want to take the time to fill the hydraulic fluid.

As mentioned before, when the fluid is low in a log splitter, you are going to see all sorts of issues arise. This is not just about how weak the log splitter is but also other issues including components failing. You will want to be quick to respond in a situation such as this.

It is the best way to make sure you are filling the fluid as soon as possible.

How much should you fill the fluid in a log splitter?

You will want to fill the fluid to the top as that is going to allow you to use the log splitter without having to think about how much fluid is in there.

3. Inspect For A Loose Hose

It is possible the log splitter has a damaged or worn-down component.

This does happen more often than you would realize and it is something you are going to want to take the time to address in greater detail.

You will want to inspect for a loose hose.

The goal is to see if the hose has come loose or has been damaged to the point it is not letting the fluid go through as it needs to.

This is going to have an instant impact on how the log splitter functions. It can even get to the point where the log splitter is going to come to a stop until you top up the fluid. It is essential to consider this when you are fixing a log splitter.

Final Thoughts

These are the steps that will help out when a log splitter is weak.

If the log splitter is weak, it’s best to inspect the amount of hydraulic fluid in the machine. If it’s low or the fluid is leaking, it’s best to fix the issue by topping up the fluid in the log splitter. Another reason can be a loose hose, which is not allowing the fluid to go through.

You will need to focus your attention on this part of the log splitter to see what is going on. It is the only way to control the issue and make sure it does not get to the point where the log splitter stops working entirely.

Yes, this can happen and it is something you are not going to want to see happen.

Get on top of this and make sure the log splitter is not weak any longer. This is the best way to keep things under control with the machine.