My Snowblower Is Hard To Push! (Fixed)

Moving a snowblower around is not easy and it becomes increasingly difficult when one of the components break down.

This is a potential issue you might face if you don’t take the time to look at why the snowblower is hard to push.

If a snowblower is hard to push, the most likely issues will involve a damaged friction disc or scraper blade. To fix the issue, tighten the scraper blade and replace the damaged part. It’s also recommended to remove debris from the wheels and check the alignment.

In most cases, the issue is going to have to do with the scraper blade or the friction disc.

This is what you are going to want to look at before anything else.

This article is going to help explain more about what to do when a snowblower is hard to push and how to fix it.

How To Fix Snowblower That’s Hard To Push

1. Inspect And Replace The Friction Disc

Your first step is to look at the friction disc.

The friction disc is essential in getting the wheels to move properly and ensuring the snowblower is going in the direction it needs to.

If you are not looking into this, the snowblower is going to be difficult to push and it will keep getting stuck where it is. Be careful while managing something like this and ensure the snowblower does not break down.

When it is time to look at potential damage with the friction disc, you will want to turn the disc with your hand. See if it spins or does not spin.

If it is not spinning, this is a sign the issue has to do with the friction disc and it has to be replaced right away.

The friction disc in a snowblower will have to be unscrewed and then removed.

Always take the time to look for an adequate replacement when it comes to a friction disc so you don’t end up damaging it.

2. Tighten The Scraper Blade

You will want to tighten the scraper blade.

This is one of the most important things a person has to do when it comes to how the blade works. If the scraper blade is loose, it is not going to let the snowblower move freely.

This will cause it to stutter and/or remain stuck where it is.

This can happen if you jarred the snowblower against something while cleaning the snow. It tends to happen when the snow is hard.

This is why you will want to take the time to look at the scraper blade and tighten it. If it is damaged, you will need to replace the part.

3. Check The Alignment

You will want to take the time to check the alignment with something like this.

The snowblower should not be in a position where it is misaligned as that is going to cause the snowblower to move in one direction or the other.

This can happen when one of the wheels becomes loose.

It is also possible something got jammed in the wheel causing it to blow out. This is a sign you will need to replace the wheel or the snowblower is not going to move the way it needs to.

Look into this by pushing the snowblower back and forth.

Does it move in a straight line?

If it moves a little bit but tends to veer away in one direction, this is likely an alignment issue. Otherwise, if it is stuck in place then it might be one of the other parts that are letting you down.

4. Remove Any Debris

You will always want to take the time to look for potential debris in the snowblower.

This does happen if you are not careful.

Debris gets trapped near the wheels, which means the snowblower cannot move freely. This is something you will want to take the time to look at.

The goal is to turn the snowblower over and then see whether or not there is snow in the machine. If it is, you will want to take something sharp like a stick to remove the debris as soon as you can.

Final Thoughts

My snowblower is hard to push!

If a snowblower is hard to push, the best solution is to inspect the friction disc and scraper blade. Next, you will want to tighten the scraper blade or replace one of these damaged parts. Other solutions include checking the wheel alignment and removing debris from the snowblower.

Each situation is going to be different when it comes to the reasons for the snowblower not moving as it needs to.

Go through the steps mentioned here and see what the underlying concern is.

This is how you are going to know what to do next with the snowblower and how to get it to move freely.