The pool skimmer is a functional part of the fixture and it has to be kept in good shape.
If there is something wrong with the pool skimmer, it will cause the swimming pool to not remain in the condition it is supposed to. The water is not going to get filtered properly and this is going to ruin the quality of the swimming pool.
It’s important to pinpoint whether or not there is suction in the pool skimmer. If there is no suction in a pool skimmer then it is time to get to the bottom of things as soon as possible.
If there is no suction in a pool skimmer, start by inspecting the skimmer basket. Once done, use a drain cleaning bladder to blow the line from the pump. This should unclog the line and the skimmer. Test the skimmer to see if water is going through again.
This is all you are going to have to do to get the pool skimmer to work again.
Here is more on how to fix no suction in a pool skimmer and how to do it the right way.
Table of Contents
How To Fix No Suction In Pool Skimmer
1. Inspect The Skimmer Basket
You will want to start with the basics.
This includes figuring out where the issue lies.
In most cases, the issue is going to have to do with the skimmer basket. It is not going to be in the right shape and that creates a real issue for those who are dealing with a lagging pool skimmer.
You will want to assess the skimmer basket to see whether or not it is clogged.
If it is clogged, the water is not going to be sucked up as it needs to and that creates real concerns about how things are going to unfold.
You will want to get working on a fix if this is the case or it will not work as you want it to.
2. Use A Drain Cleaning Bladder
What type of solution are you going to use when it comes to working on a clearing the pool skimmer?
You will want to start by using a drain cleaning bladder.
This is a specific tool that is used to clear out drains and that includes a line going to the pool skimmer.
You will want to make sure it is the right type of part as that is the only way it’s going to work well. You will not want to cut corners on the part you are getting and make sure what you are buying works with swimming pools.
This is how you are going to clear out the line and make sure it works as you want it to.
3. Blow The Line From The Pump
You will want to think about how you are going to use the drain cleaning bladder.
There are two options.
You are going to either want to work from the pump side or you are going to go to the pool skimmer. Both are viable options as long as you are using the right drain cleaning bladder.
The goal is to make sure you are blowing the pump with a purpose.
This includes setting it into motion and ensuring the drain cleaning bladder sits in the right spot. Once you do this, it will be easy to activate the drain cleaning bladder to get it to clear out the line.
4. Check The Pool Skimmer
The last step is to check the pool skimmer.
Your goal is to going to be to see if the pool skimmer is working now.
If the drain cleaning bladder does its job, you should have a situation where the pool skimmer does work properly and begins to suck water back in.
This is the only way the water is going to clear out and it will work in line with what you want.
If it does not work, you are going to take the drain cleaning bladder and run it again to see if it helps push debris out of the line.
Final Thoughts
These are the best tips on how to repair no suction in a pool skimmer.
If there is no suction in a pool skimmer, the first step is to assess the skimmer basket for a blockage. If there is a blockage, it’s time to invest in a drain cleaning bladder and blow the line from the pump side. It can also be done from the skimmer side. Once done, the clogged spot should be gone and it will become easier for the pool skimmer to do its job.
Do not compromise on this as it is the only way you are going to see the results you are after.
Look into this and then see if the pool skimmer works as you want it to.
