When you connect an RV to city water, the water pressure needs to be in line with what you want.
This can lead to issues with each element in the RV, which is a real concern.
To avoid this, you are going to want to figure out why there’s no water pressure in the RV when hooked to city water.
If there’s no water pressure in the RV when hooked to city water, it’s likely due to the filter being clogged. If not, you will require a booster pump to help increase the water pressure.
You do not want to skip these steps when looking at the water pressure in the RV.
The most common reason has to do with the water filter. When the filter has become unclean or clogged, the water pressure is going to drop dramatically.
You will want to take the time to check the water pressure and see how it relates to the water filter. This is how you are going to know it will work out as you want it to.
This guide is going to provide tips on how to manage a situation where there’s no water pressure in the RV when hooked to city water.
Table of Contents
Tips If There’s No Water Pressure In RV When Hooked To City Water
1. Check The Filter For Clogging
If there is no water pressure in the RV, you have to start with where the water is coming from.
City water or any other water source is going to get impacted by the water filter. The filter has to be clean or the water is not going to get through as it should.
This will begin to impact all elements in the RV including the RV shower or the RV toilet. You have to ensure the filter is unclogged.
Take the time to see the filter and pinpoint potential clogging in the RV.
2. Add A Booster Pump
Let’s assume the water filter is clear.
You are now going to have to figure out what is causing the water to not be pumped properly into the RV. What is leading to the water pressure dropping?
The issue will have to do with the components that are in place.
You will need what is known as a booster pump. This is going to help push the water forward and make sure it has enough water pressure behind it.
If you are not looking to get a booster pump for the RV, you are going to be missing out. This is a key detail to think about when you are in a situation such as this.
3. Inspect The Connection To The City Water
It is important to think about the connection to the city water in the RV.
It is possible you have not connected properly.
This will lead to all sorts of issues and can also cause leaking if you are not careful. You will want to get to the bottom of this as soon as you can.
If you let this issue linger, the leaking is going to get worse and the water pressure will not improve regardless of what you do with the filter or a booster pump.
Take the time to look at the connection point and make sure it is secure. This is a must.
4. Re-Check The Water Pressure
You will want to take the opportunity to see what the water pressure is after you have gone through these sets of changes.
The goal is to see which one is going to help with the water pressure.
You can take a look at the pressure gauge to see how the RV is doing. It will also become noticeable when you start using the RV toilet and it is not sputtering.
This is a common sign the water pressure in the RV is better and you will see good results as soon as you start using the fixtures.
Final Thoughts
These are the steps that will help if there’s no water pressure in the RV when hooked to city water.
If there’s no water pressure in the RV when hooked to city water, the most likely issue has to do with a clogged filter. To fix the issue, clean the filter or change it. If the filter is clean, inspect the connection point to the city water and add a booster pump to increase the water pressure.
This is going to lead to good results and the water pressure is going to go up in the RV.
You will have to be diligent while testing the water pressure as a way to make sure it continues to work as you want it to.
Be thorough when you are looking at how an RV is doing and continue to maintain it. This includes taking regular looks at the water pressure in the RV.
