If a pool liner is pulling away from the wall, it’s essential to analyze what’s causing it to do this and what can be done to improve the situation.
The pool liner should be snug for it to perform as required. Otherwise, the pool is going to be compromised and that’s not good over the long haul.
One issue people report is when the pool liner is not against the wall.
To fix a pool liner that is not against the wall, re-install it on a warmer day. Cold weather installations lead to wrinkles and unwanted issues. It’s also recommended to inspect the corners for damage and drain the pool before the re-installation.
Pool liner coving is a real concern and it has to be addressed as soon as possible.
If you wait for a hot, sunny day, this is going to bode well for how the installation turns out. You should consider this when it’s time to repair a pool liner that is not tight in the corners.
Here are the steps to fix a pool liner that is loose against the wall.
Table of Contents
Steps To Fix Pool Liner That’s Not Against Wall
1. Wait For A Warmer Day
When a pool liner is pulling away from the wall, you will need to consider whether or not you have installed it properly.
It’s common for pool owners to ignore the weather when installing the pool liner. Just because it’s dry outdoors does not mean it’s an ideal day to install a pool liner.
The pool liner is not going to sit against the wall if you install it on a colder day.
So, what should you wait for?
You will want to re-install the pool liner on a warmer day. This is going to make it a lot easier to get the pool liner to sit in place.
It’s also recommended to look at the type of pool liner you are using. It might not be the right size and that is the reason it is not sitting against the wall as required.
It’s best to measure the pool liner and see if it matches the pool’s requirements.
This is the best way to make sure the problem is kept under control.
2. Inspect The Wall
Wrinkles in the pool liner are a common sign there is something wrong with it.
This should not be happening.
It should be a perfect fit and that is the only way to avoid any type of pool liner coving. You will want to take the time to inspect the pool wall to see what’s wrong.
Is there something that is getting in the way of the pool liner? You might have to remove the pool liner and take a look to make sure it is not being blocked.
3. Drain The Pool
Now, it’s time to re-install the pool liner.
If the pool liner is not flat against the wall, you will need to drain the pool.
The reason you are going to drain the pool is to make sure there is no water or air behind the liner. This can cause it to not sit properly.
You will want to drain the pool and then get rid of the air pockets in the pool. This is the only way you are going to get the pool liner to sit as required.
In some cases, you won’t have to drain the pool, but for the most part, this is the way to go.
4. Re-Install The Pool Liner
If a pool liner is slipping out of the track, it’s essential to re-install it correctly.
How are you going to do this?
You are going to re-install the pool liner by waiting for a warmer day and then draining the pool. As soon as the pool is empty, you are now going to begin resetting the pool liner assuming it is the right size as required.
If it is the right size, it should fit now.
You will want to check the corners to make sure the pool liner fits. This is the only way it is not going to sag.
Final Thoughts
These steps will make it easy to fix a pool liner that’s not tight in the corners.
If a pool liner is not against the wall, check the wall for damage, drain the pool, remove the pool liner, and make sure to re-install it on a warmer day. This will ensure the pool liner sits snugly against the wall and does not budge.
It’s essential to test the pool liner and make sure there are not air pockets behind it. This can cause the pool liner to wrinkle.
Whether the pool liner does not fit in the corners or it is simply small, it is best to assess it in greater detail by emptying the swimming pool.
