The cove is noted for being the point where the liner touches the wall.
It is often a spot where the pool liner begins to create issues. It is due to that connecting point having to be pinpoint perfect or the liner is going to lose its shape.
You have to consider this part of the pool when you are assessing the pool liner.
This can include a scenario where the pool liner is not touching the cove.
If the pool liner is not touching the cove, it’s essential to take off the pool liner and see if the cove itself is shifting due to having a weak foundation. It’s also recommended to increase the water level and re-install the pool liner if it’s in good shape.
For the most part, the pool liner will have to be re-installed to get it back to how it needs to be. When the pool liner is not touching the cove, this is not a good sign and it will lose its shape immediately.
Look into this and make sure you are assessing what will work when it comes to getting the pool liner to work properly.
This article is going to show you how to fix a pool liner that is not touching the cove.
Table of Contents
How To Fix Pool Liner Not Touching Cove
1. Take Off The Pool Liner
Before doing anything else, you will want to take off the pool liner.
This is going to let you see what’s going on with the cove and how to make sure the fit is perfect. Sometimes, it’s difficult to see the full picture until you do this and that’s what you should be aiming for when managing the pool liner.
Take your time with the pool liner to get it to work the right way.
It’s important to make sure the pool liner remains in good shape. This is integral when it comes to understanding how to do things the right way so it does get back to how it was.
2. Check For Shifting Cove
Now that the pool liner is off, it’s time to begin the assessment phase.
What you are going to be looking for is to see what is causing the pool liner to not touch the cove. There has to be an underlying reason for this to happen and that is what you are going to get to the bottom of as soon as possible.
So, what will you be looking for?
You are going to be looking to see if the cove has shifted. This is possible and that can be more than enough to create this type of problem.
The pool liner is not going to fit any longer when the cove has shifted. This is why it’s best to make sure the foundation under the pool and around it is stable. If not, this is what has to be fixed rather than the pool liner.
3. Increase The Water Level
Sometimes, the pool liner begins to lose its shape because the water level in the pool is too low.
This is a common sight and it’s something you are going to want to address as soon as you can. Don’t create a situation where the water level is too low as that is going to take away from how it works.
If you increase the water level, you are going to make it easier for the pool liner to fit. Focus on this to make sure the results are perfect and the pool liner does turn out to work as you hope for it too.
4. Re-Install The Pool Liner
Now that you have found out what was wrong with the cove and/or the pool liner, it’s time to decide one way or the other.
What will you decide?
You will either want to re-install the existing pool liner and see if it fits. If the pool liner was the issue, you will want to replace it as soon as you can.
Replacing the pool liner is a good option because it’s stress-free. You will not have to worry about the pool liner coming off later or not touching the cove.
Final Thoughts
Look at how to fix a pool liner that’s not touching the cove.
If the pool liner is not touching the cove, start by removing the pool liner. Next, check to see if the cove has shifted and fix the foundation if that’s the case. If not, add more water to the pool and then re-install the liner to see if it fits. If not, replace it.
This is important when you are managing a pool liner and figuring out what is happening with this part of the pool.
Continue to assess the pool liner and make sure it fits properly as soon as possible.
