The pool pump is supposed to work seamlessly in the background and ensure the flow rate does not drop.
To maintain the flow rate in a pool, it’s essential for the pool pump to work the right way. This includes there being enough suction for it to work properly. If not, the pool pump is going to stop running or it is not going to stabilize the flow rate as required.
This is why you have to be diligent when learning how to fix a pool pump with no suction.
If a pool pump has no suction, it’s best to replace the filter and increase the water level in the pool. It’s also possible there is debris in the pool pump impeller that has to be removed or the pump seal is damaged.
It’s essential to work your way through these issues because the pool pump is not going to run correctly until you take the time to figure out what is going on with it.
Here is a complete guide on how to fix a pool pump with no suction and how to do it the right way.
Table of Contents
How To Fix A Pool Pump With No Suction
1. Replace The Filter
You will have to think about replacing the filter.
Yes, there are two options when it comes to the filter. The first option is going to be to see if there is debris in the filter that can be removed.
Depending on how long this has been going on, it might get to the point where the best option is to replace the pool pump filter. This will come down to what is happening with the pool pump filter and how much debris is in there.
If you are looking to do things the right way then it is better to go with the second option, which is to replace the pool pump filter.
This is going to make it a lot easier to keep the flow rate high and you will know the pool pump is going to be filtering the water as required.
2. Increase The Water Level
You will have to check the water level in the pool.
Sometimes, when the water level is too low, this becomes an issue for the pool pump. The pump is not going to run the right way and it will create a real issue with how much water is going through the system over time.
You don’t want a situation such as this to occur.
It is better to make sure you are increasing the water level to a more reasonable rate. Just doing something like this is going to make it easier for you to get the water level to a rate that is going to turn out the way you want it to.
3. Check The Pool Impeller For Clogging
You have to think about the pool impeller.
The pool pump impeller is a part that is going to have to be running the right way or it is not going to offer enough suction.
What is an issue that can crop up with the pool pump impeller?
In general, the issue that you are going to see is when the pool pump impeller is clogged. There is debris in the impeller that is hard to take out and that is when the trouble rises. Focus on this and make sure you are creating a situation where the pool pump impeller works the way it needs to.
4. Inspect The Pump Seal
You have to inspect the pump seal.
This is one of the issues a person is going to have to face when it comes to how robust the setup is. You can’t have a situation where the pump seal is damaged.
This is going to get water to start leaking and that also means there will be no suction in the pool pump. You have to protect the seal and the best option is to replace it.
Fixing the pool pump seal is a major step in the right direction and is going to make it a lot easier to get it to run the way you want it to.
Final Thoughts
These are the best tips on how to fix a pool pump that has no suction.
If a pool pump has no suction, it’s likely due to debris in the filter or pool pump impeller. It’s recommended to either remove the debris or replace the part. It’s also possible the water level in the pool has to be increased and the seal is damaged.
Look at each part and make sure the water level is as high as it needs to be in the pool.
Until you do this, the pool pump is going to give you trouble and it might not run at the rate you want it to.
