Pool Water Feels Thick! (Fixed)

When it’s time to manage pool water, it’s common for people to fret about how the water feels.

You are not just looking for potential chemicals in the pool but also how it feels. This can lead to a variety of situations including the pool water feeling chalky or even slimy.

However, what if the pool water feels thick?

If the pool water feels thick, this is likely due to excess magnesium and/or calcium. The best solution when this happens is to check the calcium or magnesium level with a testing kit and then add a pool mineral remover to the water. Wait a few hours once done and then run the pool filter.

This is going to get rid of the impurities in the water and make sure it does not feel thick any longer.

If the pool water feels too thick, this is not good over the long term and is going to do more damage than good.

Here is what you are going to have to think about when it is time to understand why the pool water feels thick.

Steps To Fix Pool Water That Feels Thick

1. Test The Water For Calcium And Magnesium

If the pool water feels thick, you will want to take the time to test the water. This is how you are going to get a better read on how much the water has been impacted.

When the pool water has too many minerals, it is going to start feeling different. This happens due to the nature of those minerals whether it has to do with calcium or magnesium.

When the pool water is too thick, it is likely due to an abundance of calcium and/or magnesium in the water.

You will need to find out if that is the case in your situation.

The first thing you are going to do is use a testing kit to look out for these minerals in the pool water. If the testing kit states that is the case then you will know it is time to get rid of those minerals in the pool as soon as possible.

2. Use A Pool Mineral Remover

What are you going to use to remove calcium from a pool?

You are going to have to look at a specific pool mineral remover that is made for this purpose. There are numerous options on the open market that can be used for the swimming pool.

They are going to help balance the pool water and make sure those minerals are cut out as soon as possible.

You will want to look for a good one that is well-reviewed to ensure it does not harm the pH level at any point. If you do this, you will feel good about how the pool mineral remover works.

3. Wait A Few Hours

You are now going to want to wait for the pool mineral removing agent to do its job.

The purpose of doing this is to ensure you are letting the pool mineral remover continue to put in the effort required to clean things up.

If you are not doing this, you are not going to see good results and that will create major issues over time.

You need to wait a few hours to let things settle a bit. If you do this, you are going to see good results wit how the pool water feels.

4. Run The Pool Filter

When you have let the pool mineral remover do its job, it’s time to start thinking about letting the pool filter run.

The reason you are going to let the pool filter runs is to make sure the water is as clean as it needs to be. A lot of people don’t do this and that creates a problem where the pool water is not as clean as it needs to be.

Your best option is to make sure the pool filter regulates the water and then gets rid of contaminants that are present in the water.

This is a lot better than letting things continue as-is.

Final Thoughts

It’s important to go through the steps listed here to ensure you are getting to work on pool water that feels thick.

If the pool water feels thick, this is likely due to a lot of calcium or magnesium build-up. To get rid of this build-up, it’s best to pour a pool mineral remover into the water and then wait a few hours. This will help get rid of the excess minerals.

You also want to take the time to let the pool filter run and take care of the water. This is how you are going to feel good about how it turns out and how clean the pool water is.

Be patient while doing this and always keep using the testing kit in the pool to see how the water is doing moving forward.