When it is time to begin working on the toilet flange in the RV, it’s essential to know how to get it to come off.
A lot of RV owners don’t know what to do when the RV toilet flange is stuck.
This includes a situation when the RV toilet flange is glued to pipe.
If the RV toilet flange is glued to the pipe, it’s best to turn off the water and then remove the caulking using a sharp tool. Once done, loosen the bolts and pull off the toilet. You will now have access to the toilet flange. Loosen the nuts using a wrench and then pull off the flange.
It’s important to look through these steps when it comes to removing the RV toilet flange from the pipe.
In some cases, it will be stuck and it is not going to be easy to pull off. This is when you will have to use strength and make sure the nuts are loosened to the point you can take off the toilet flange in an RV.
How To Remove RV Toilet Flange Glued To Pipe
1. Turn Off The Water
You will want to turn off the water.
It’s important to turn off the water and make sure nothing happens when you take off the toilet. Do not pull off the toilet as it is going to start leaking from the sides and eventually damage everything.
Always drain the toilet and then begin working on taking it off. This is the only way to do things.
You will want to look to find the valve that will control the water flowing to the RV toilet.
You will want to turn this off and then make sure there is no water in the toilet. Do not attempt to take it off until you are certain the water is not going to overflow or leak.
2. Remove The Caulk
You will now have to find a way to take off the toilet.
This is the only way you are going to access the toilet flange.
You will want to remove the caulk by using a sharp tool. You are going to begin to work on the caulking with the help of the sharp tool.
Continue to chip away at the sealant until you are sure it is loosened. This is the best way to begin working on the bolts that are holding the toilet down.
It is not going to come off until the caulking is off.
It’s essential to do this carefully and make sure it is done cleanly. This is something that will take time but it will need to be done the right way.
3. Loosen The Bolts And Remove The Toilet
You are now going to begin to work on the bolts.
You have to make sure you loosen the bolts and ensure the toilet comes off cleanly. This is going to be easy in most cases.
You will want to take the time to loosen the bolts one by one.
This is going to help pull on the toilet and then it will come off easily.
Remember that you have to make sure to set the toilet aside so you can begin to work on the toilet flange.
4. Use A Wrench To Loosen The Nuts And Pull On The Toilet Flange
Now you are going to have full access to the RV toilet flange.
To remove a toilet flange in an RV, you are going to need a wrench.
This is going to be required to loosen the nuts that are holding the toilet flange in place. You will have to be careful as you are working on the nuts and get them to loosen to the point you can pull on the toilet flange without damaging anything.
It is going to take a bit of force to pull it off.
Continue to pull on it until it comes unstuck. This is essential when it comes to a toilet flange that is stuck to the pipe.
When you begin working on the setup, it’s best to understand your options with the steps here. This will make it easy to remove an RV toilet flange that is glued to the pipe.
If the RV toilet flange is glued to the pipe, turn off the water supply and use a sharp tool to remove the sealant. Once done, loosen the bolts and pull out the toilet. You will now have access to the toilet flange. Loosen the nuts using a wrench and then pull out the flange.
It is going to take a bit of force to get the RV toilet flange off but it will be done cleanly when you use the right tools.
Do not pull the toilet flange until the nuts are loosened as that will make sure it comes off safely.