When it’s time to SLAM a pool, it’s important to know what the main steps are and what to avoid.
Most people will want to SLAM a swimming pool but won’t know where to begin. This is okay as long as the right treatment is used and you keep an eye on the pH level.
How to SLAM a pool comes down to the basics.
To SLAM a pool, use a testing kit to know the underlying pH and alkalinity levels. Next, adjust the pH and then shock the pool. Once done, re-test the pH level and maintain the pool by cleaning it.
One of the most important elements of shocking and maintaining a swimming pool is to test the water repeatedly. You have to make sure the pH level in the swimming pool is stable and it does not spiral out of control after a shock treatment.
This guide is going to show you how to SLAM a pool properly.
Table of Contents
Steps On How To SLAM Pool
1. Use A Testing Kit
To SLAM a swimming pool, you have to make sure the water is stable.
What does this mean?
There are a few things you will want to test for in the water. This is going to include the underlying pH and alkalinity levels. The reason you are going to do this is to get a read on how the water is before you shock it.
Sometimes, the water is going to have a high pH and that is not going to let the shock treatment work as required. To avoid a situation where you are wasting time and effort on water that’s unstable, it’s better to get a read on it beforehand.
Take a testing kit and see what the water levels are like.
You will now have a current pH reading along with a look at the alkalinity levels in the water. If the reading is too high, it’s best to look at making adjustments before you shock the pool.
If it’s stable then you can move to the third step.
2. Adjust The pH
Let’s assume you use the testing kit in the swimming pool and the pH is too high.
What are you going to do at this point?
It is important to make sure you are adjusting the pH in the water as soon as possible. This is the only way you are going to make sure the water does not get to the point where it does not respond to the shock treatment.
You will want to have a specific number in mind for the pH level.
It is best for it to be between 7.2 and 7.6. This is the right pH level for a swimming pool that’s going to be shocked.
For the alkalinity levels, you will want to ensure it is reading between 80-120 ppm.
3. Shock The Pool
When the water has stabilized and you are getting the right reading with your testing kit, it’s time to move to the next step.
This is going to be when you shock the pool.
To do this, you are going to want to use the right shock treatment and follow the instructions. It should take at least eight hours for the water to settle.
It is important to use the right shock treatment for a swimming pool as that’s how the SLAM process is going to work as required. You will see the numbers settle when you are doing this the right way and it will turn out as needed.
4. Clean And Maintain The Water
You are now going to have a swimming pool that’s in good shape.
However, this does not mean you are done.
You will want to take the opportunity to clean the pool and make sure the scrub the walls. It is essential to do this when you want to maintain a swimming pool during the SLAM process.
Remember, the “M” stands for maintain and that is what you are going to have to do.
To SLAM a pool, it’s important to start by testing the water with a kit. This will look for a pH level between 7.2-76 and an alkalinity level between 80-120 ppm. Once done, shock the pool with the right treatment and then scrub the walls to maintain the water.
This has to be done in order to make sure the shock treatment works in the swimming pool.
If you are filtering the water in the pool, it’s going to work well and the pool will be shocked correctly. This is what you will want to aim for as a pool owner.
