Smoking coming from a snowblower is a terrible sight.
You will want to figure out where the smoke is coming from and how to address it. This is something that will need attention as soon as possible or the snowblower will get damaged to the point of no return.
Do not take smoke lightly.
One part that can smoke is when you see the snowblower auger belt smoking.
If the snowblower auger belt is smoking, it’s time to re-align the belt and check for potential damage to the component. It’s also common for smoke to arise when the snowblower has been overloaded and overworked. In rare cases, it might have to do with a power issue stemming from the engine.
You will want to take a look at the belt and make sure it is intact. If it is worn down, it will have to be swapped out for a new snowblower auger belt.
If it needs to be re-aligned, take off the snowblower auger belt and put it back on. This is how you are going to get it to work properly.
This article is going to show more on how to repair a snowblower auger belt that’s smoking and how to do it the right way.
Tips On How To Repair A Snowblower Auger Belt That’s Smoking
1. Re-Align The Belt
You will want to take the time to figure out whether or not the alignment is fine.
It’s possible the snowblower auger belt is not stable. This is going to cause the belt to not turn the right way, which is going to impact various aspects of the snowblower.
Your best option in a situation such as this is to take off the snowblower auger belt.
The reason you are going to take it off is to put it back on starting from the beginning. This will let you get a proper look at the pulley system and how you are going to set up the snowblower auger belt.
2. Check For Damage To The Belt
You will also want to take the time to check for damage to the snowblower auger belt.
The belt may have worn down over time.
This does happen when the snowblower has started aging. As it gets older, the components are going to have miles on them and that is when they will need to be replaced.
This is why constant maintenance is recommended for snowblowers to ensure the components are in good shape. It’s essential to make sure you are not using the same snowblower belt when it is damaged.
This is not good for the machine and it will take a toll on how the snowblower functions.
3. Avoid Overloading The Snowblower
If smoke is coming from the snowblower, you may be overloading the machine.
What does this mean?
The premise is that you are going to be putting too much pressure on the snowblower and this is going to cause it to break down.
At first, the machine is simply going to start making odd noises but then you will see the smoke arise. This is a warning sign that the machine is going to break down on you.
The best option here is to turn off the snowblower and let it cool down.
At that point, you are going to make sure to not overwork the snowblower beyond its capabilities.
4. Look For Power Issues From The Engine
There is the potential for power issues to arise stemming from the engine.
Why does this happen?
It is due to the power that is going to be relayed to various parts of the snowblower and that’s going to include the auger belt. When enough power is not getting to the belt, it’s not going to move the right way.
This is going to cause it to either get damaged or you are going to notice smoke coming from the engine.
It’s important to make sure this does not happen and that you do address it the right way.
Final Thoughts
Work your way through this advice when it is time to repair a snowblower auger belt that’s smoking.
If a snowblower auger belt is smoking, it’s recommended to check the belt for damage and re-align it. This is done by removing the belt and putting it back the right way. It’s also possible the machine was being overworked and should be allowed to cool down. In rare cases, it will be a power issue from the engine to the belt.
You will want to look at all of these reasons to see what is wrong with the snowblower auger belt.
This will impact how the snowblower auger functions and it can also cause the auger to stop working properly. This can cause the machine to come to a stop.
