When moving a snowblower, it’s normal to want it to go ahead without hindrance.
In some situations, the snowblower auger is going to become a hurdle. This occurs when the snowblower auger turns slowly.
If the snowblower auger turns slowly, this means the belt is loose and/or damaged. To fix the issue, inspect the auger, check the belt for damage, and tighten the belt. If it is fully damaged, replace the belt immediately.
This is the best way to make sure the snowblower auger does not turn slowly and it starts working as you want it to.
This article is going to help take a look at what you should do when the snowblower auger turns slowly or does not move as you want it to.
Table of Contents
How To Fix A Snowblower Auger That Turns Slowly
1. Inspect The Auger
Before you start looking at the rest of the snowblower, you are going to want to go to the heart of the problem.
This means you are going to want to check the auger.
The goal here is to see what is wrong with the auger and then pinpoint what your options are. This is how you are going to make sure the auger is not damaged and/or something around it is not loose.
A lot of people look towards other components rather than thinking about how the snowblower auger is doing.
Look at it in great detail and make sure it is in good shape.
If you feel like it is in the right shape, you can then start to look at other elements such as what is wrong with the snowblower belt.
2. Check The Belt For Damage
This is a common issue people deal with.
You will have a situation where the snowblower belt will get damaged or becomes loose.
If you have been using the snowblower for a long time, it is possible the belt came loose. This can happen when you are moving it around. However, it can also get trapped to the point where the belt gets damaged.
You will want to make sure to look at the snowblower belt from top to bottom.
This will shed light on what went wrong with the snowblower belt and what you can do about it moving forward.
3. Tighten The Belt
You will always want to tighten the belt.
This is the most important step in the process and it has to be a step you take to make sure the snowblower auger starts to turn quicker.
Until you do this, you are not going to see good results.
You will want to look to find where the belt is and then use a wrench to begin tightening the bolt holding the belt.
This will take time and each model is going to be different as to how the belt is running.
If the belt is not tight enough, it is not going to turn.
This is what will cause the issues to pop up. You will want to make sure to look at the snowblower belt by assessing what is causing it to stop moving as you want it to.
This can also lead to a situation where the snowblower does not start.
4. Re-Test The Snowblower
When you are done working on the snowblower auger and you have tightened the belt, it’s time to re-test the machine.
This is going to include turning on the snowblower and then moving it around.
Your goal is to make sure the snowblower does not stop or does not get in the way of what you are doing. This is what creates real concern when it comes to getting the machine to move as you want it to.
Always look to go over a smaller area when working on the snowblower.
You do not want a situation where the belt gets jammed up.
It is best to take it slowly and see whether or not there is a hitch as you move the snowblower around. This will shed light on if it is a good idea to move the snowblower around or get it to a spot where it is safe.
Final Thoughts
These are the tips that matter if the snowblower auger turns slowly.
If a snowblower auger turns slowly, the most likely reason is a damaged or loose belt. To fix the issue, it’s best to start by inspecting the auger and then checking the snowblower belt for damage. If it is damaged, tighten the bolt holding the belt and make sure it does not hang loosely.
There will be a bit of a trial and error during this part of the process.
You will want to test what is wrong with the belt. This includes ensuring it is not damaged to the point it does not move around the way you want it to.
