A snowblower chute that continues to wobble and create issues is going to be difficult to manage.
You will not want to continue using the snowblower until the chute is in control. This will cause the snow to go to places that you don’t want it to.
When the snowblower chute is not working the right way, you will need to figure out what is going on and how to reel things back in.
This includes a snowblower chute that turns on its own.
If the snowblower chute turns on its own, this means the nut behind the chute is loose. Start by inspecting the nut and then tightening it using a wrench. Once done, push the chute to make sure it does not budge. Once it stops moving, it’s time to test the snowblower out in the snow.
This is how you are going to make sure the snowblower chute does not keep moving when you don’t want it to.
This article is going to pinpoint what you should do if the snowblower chute turns on its own.
Table of Contents
Steps To Fix A Snowblower Chute That Turns On Its Own
1. Inspect The Nut Behind The Chute
The main problem with the snowblower chute is going to have to do with the nut that is holding it in place.
When it loosens, it is going to cause the snowblower chute to become unstable.
A wobbly snowblower chute is not easy to manage and is going to make it difficult to use in snow.
It’s best to start by taking a look at the nut to see whether or not it is loose.
You will also want to take the time to see if the nut has been damaged. This does happen at times and it is best to make sure to replace the nut rather than tighten it again.
2. Tighten The Nut
This is the most important step in fixing a wobbly snowblower chute.
You are going to do this by taking a wrench and then tightening the nut. It will continue to spin until you have tightened it properly.
Take your time while doing this and continue to test the chute.
This is how you are going to know whether or not it is working. The nut might be loose to the point it has to be replaced and that is a common issue when the snowblower has been stored the wrong way. The nut is going to wear down with time.
You will want to keep tabs on the nut and make sure it does continue tightening as you are going about fixing it.
3. Push Against The Chute Until It Doesn’t Move
You will want to take the time to continue pushing against the chute while you are working on the nut.
The reason for doing this is to make sure it does not budge.
It’s important to continue to do this with the other hand while tightening the nut. You are going to get immediate feedback if the chute rattles or budges.
If it does not budge, this means the nut is now tight enough and you are good to go. Keep this in mind when you are figuring out what your options are.
You will want to make sure the chute does not move as it might become loose again if you don’t consider this.
4. Run The Snowblower On Snow
You will now want to take the snowblower out into the snow.
The idea is to see if the chute works as you want it to. The chute needs to be tested, which includes seeing how the snowblower runs when it is in the snow.
You don’t want a situation where it continues to run to the point where it does not work. You will want to keep tabs on this.
If the chute does not move in heavy snow then you are on the right track and the problem is good now.
If it does move, you will have to go back and continue to work on the loose nut.
Final Thoughts
These are the details you have to go through when it comes to dealing with a snowblower chute that turns on its own.
If the snowblower chute turns on its own, this means the nut behind the chute has loosened or is damaged. To fix the issue, take a wrench and tighten the nut until the chute stops wobbling. Once done, take the snowblower out into the snow and test how it does.
This is a must when you are trying to get the snowblower to move the right way and clear out the snow.
Continue to test the snowblower in different places to see how it does.
This is key when the snowblower chute is giving you issues and you are trying to pinpoint what the problem is.
