If a snowblower starts leaking gas, you are not going to want to keep using it.
This can become a danger to not only you but also to the snow blower. It will end up leading to major issues with the internal components and you might have to replace the entire snow blower depending on how bad things get.
This is why it is best to figure out what is causing the snow blower to leak gas when tilted.
If the snowblower leaks gas when tilted, this is likely due to a leak underneath the carburetor or a loose connection running to the fuel filter. Start by inspecting the carburetor for damage, find the leak, and then replace the damaged fuel filter or carburetor depending on where the leak is.
In most cases, the leak is going to come from the fuel filter.
You will want to replace the fuel filter rather than attempt to repair it. This is much easier and is going to ensure the problem goes away for good.
Here is a look at how to fix a snowblower that leaks gas when tilted.
Table of Contents
How To Fix Snow Blower That Leaks Gas When Tilted
1. Check The Carburetor
You will want to start with the carburetor.
This is one of the possible locations where gas can start leaking.
Most people are only going to look at the top of the carburetor, but a leak such as this is going to come from the bottom. You will need to look underneath the carburetor and see if it is dripping from there.
If it is, this means there is a crack in the carburetor and it will have to be replaced.
For the most part, you will not have the chance to repair it.
Most people are going to have to take out the carburetor and replace it with a new one. Always look to find a compatible fit to ensure the snow blower still performs at 100% once it is on.
This is the best way to get the snow blower back to how it needs to be.

2. Find The Source Of The Leak
You will want to find the source of the leak.
A lot of people struggle with this when it comes to how the leak works out.
You will want to always go straight to where the gas is dripping. This is going to give you insight into the damage that has been done to the part that is leaking.
If it is the carburetor, you will likely have to change it.
If it is not, it is going to be the fuel filter connection that is too loose. This means you will want to find the source of the leak and tap into what is going on by changing it or fixing it.
Most people will want to replace the fuel filter rather than repair it. This saves time and is a much better fix.
3. Check The Connection For Fuel Filter
When you go to the fuel filter, you will want to start with the connection.
This is where the gas is going to leak from in a snow blower.
The snow blower is going to have a loose connection running to the fuel filter and this will cause it to start dripping gas from time to time. If it is too loose, the dripping is going to be extreme too.

4. Replace Fuel Filter And/Or Carburetor If Damaged
This is a part of the process you are going to need to be careful about.
You will need to figure out what the main issue is when it comes to the fuel filter and/or the carburetor.
If it is the fuel filter, you will need to replace it. Do not attempt to fix it as it will not work out and you are going to end up wasting your time.
Simply replace the fuel filter with a compatible fit.
If it is the carburetor, you might be able to fix it depending on how severe the leak is. If it is a major leak, you are better off changing out the carburetor rather than fixing it.
This is a judgment call depending on what is happening to the part.
Final Thoughts
These are the steps to focus on if the snowblower leaks gas when tilted.
If the snowblower leaks gas when tilted, the issue has to do with a damaged fuel filter or carburetor. To fix the issue, look at the bottom of the carburetor for a leak. If it is leaking, replace it. If it is not, look at the fuel filter connection to see if it is loose. This is likely a part that has to be replaced.
You are always better off replacing the part.
Keep this in mind when it comes time to fix a snowblower that is leaking gas.