When you are moving a snowblower around, it’s common for it to rattle a little bit.
However, you are not going to want a situation where the snowblower begins leaking. This is a sign there is something wrong with the snowblower and it will become a hazard if you keep using it in its current condition.
One issue that you are going to see is when the snowblower leaks oil when tilted.
If the snowblower leaks oil when tilted, this means the oil has leaked into a spot it shouldn’t. To check, loosen the carburetor, clean it, and then check the spark plug. Replace the spark plug if it is damaged and tighten everything.
It is easy to spot where the snowblower issue is because it will become noticeable based on where the oil is coming from.
You will want to follow the oil for the snowblower.
This is a must.
This article is going to look at what to do if the snowblower leaks oil when tilted.
Table of Contents
Tips To Fix A Snowblower That Leaks Oil When Tilted
1. Consider The Amount Of Oil That’s Leaking
In general, a great way to see where the problem is will involve checking the source of the leak.
Where is the oil coming from when you tilt it? How much oil is coming out of the snowblower when you tilt it?
This is an important detail to think about when it comes to ensuring the problem is fixed the right way.
If it is a small amount of oil then you will want to tighten everything around the engine and where the oil goes. This is normal and it can happen when you are using a snowblower as it might hit something causing the cap to come loose.
If a lot of oil is coming out then you might have a major leak on your hands. At this point, you need to start digging into the snowblower to see what is going on with it.
2. Loosen The Carburator
The first thing you are going to do is look at the snowblower’s carburetor.
This is one spot where the oil can start going to.
Remember that the issue might not have to do with a crack in the engine. This is often assumed because people think the oil is coming from where it has been poured.
This is not the case.
The issue has to do with the oil coming out and then heading toward another component in the snowblower. One of those components will be the carburetor.
You will want to take the time to loosen the carburetor and then assess it for potential oil nearby. If there is oil then you will likely have to clean it and then tighten the components around it to make sure the oil does not come in this direction when tilted.
3. Check The Spark Plug And Replace If Damaged
You will also want to take the time to look at the spark plug.
The spark plug may be where the issue is. You will want to look at how the spark plug is doing and whether or not it has to be changed.
If it has been damaged then you will want to replace the spark plug.
A lot of time is going to be spent diagnosing this issue as it is going to vary with each situation. Do not rush through this process and continue to see where the spark plug is and whether or not it is in good shape.
4. Tilt The Snowblower Again
When you are done, you will want to tighten everything and put the components back where they need to be.
At this point, you are going to move the snowblower around and then tilt it again.
The idea is to see if the oil still pours out of the snowblower.
If it continues to leak, you will want to start inspecting a potential crack where the oil has been poured. This might be the reason for it coming out.
Final Thoughts
It is important to go through these steps to repair a snowblower that leaks oil when tilted.
If the snowblower leaks oil when tilted, it is best to loosen the carburetor, clean it, and then check the spark plug to see the source of the leak. If the spark plug is damaged, change the part and then re-test the snowblower to see if it leaks.
You will have to troubleshoot this problem as it will vary from situation to situation.
Do not attempt to use a snowblower when it is leaking oil. This is not good for the snowblower and is going to do more harm than good.
It is also unsafe to use a snowblower when it is not working as it is designed to. Keep this in mind when you notice oil around the snowblower.
