It is not easy to deal with a snowblower that does not remain powered when it is running.
You will want to check what is happening that is causing the snowblower to stop in the middle of running. This occurs due to issues with the internal components and you will want to get to the bottom of this as soon as you can.
The one issue people state is when the snowblower loses power under load.
If the snowblower loses power under load, this means one or both of the belts are worn or damaged in the snowblower. The best fix is to replace the belts and tighten the components holding these belts in place.
This is the best way to make sure the snowblower does not lose power when it is turned on.
You will often want to change both belts even if one is in good shape. This lets you get a fresh start with the belts while also making sure they are tightly in place.
This guide is going to go through the steps needed to fix a snowblower that loses power under load.
Steps To Fix A Snowblower That Loses Power Under Load
1. Inspect Belts In The Snowblower
The main issue is going to have to do with the belts in the snowblower.
These tend to break down and that is when the power starts faltering. You will notice the snowblower is going to sputter at times and it will not load as it used to.
This is a common sign there is something wrong with one or both of the belts in the snowblower.
You will want to start by opening the snowblower and taking a look at these belts. Is there something that is standing out to you when looking at the belts?
You will want to touch them and make sure they are not loose or worn down.

2. Replace Worn Or Damaged Belts
It’s essential to take the time to look at what is wrong with the belts.
Let’s assume you take a look at the belts and one of them has been worn down. This is a sign that it will have to be replaced.
However, when you are doing this, you will want to change the snowblower belt by taking out both. This is the best time to change both at once.
You will then know this is a fresh start and the belts are both going to be running at 100%. Otherwise, the other belt might break down and you are going to have the same issue again.
Don’t let this happen and always change the belts in the snowblower when they are worn down.
3. Tighten The Components Around The Belt
When you are changing the belts in the snowblower, you will also want to look at other components in the snowblower too.
These are components that are going to be holding the belts in place.
When the belt wears down, it is also going to start impacting the components. The best option in a situation such as this is to make sure those components are as tight as they need to be. If you do this, you are going to feel more in control of the belts.
Go through each component and make sure it is in the right condition.
This is how you are going to keep those belts safe as time goes on.

4. Re-Check The Power Going To The Snowblower
The last step is to put everything back into place and then check how the snowblower does.
You will want to have a good read on the snowblower to make sure it is working as required. This is how you are going to save time and it will play out the way you want it to.
The goal here is to take it out in the snow and see how it does.
The snowblower should work well when it is turned on after the belts have been swapped out. This is how you are going to feel in control of the power and make sure it plays out as intended.
Final Thoughts
This is how you are going to want to repair a snowblower that loses power under load.
If the snowblower loses power under load, this means one or more of the belts are worn down. It’s best to replace these belts at the same time and then tighten the components around them. This will ensure the power does not go out again.
You will always want to inspect the belts when there is a power issue.
If they are too loose or damaged, you will know the snowblower’s belts have to be swapped out as soon as possible.
If you don’t do this, it might ruin other components in the snowblower and that is a much bigger deal.