Using a snowblower means it should handle all types of snowy conditions.
You will want it to respond well whether it’s a blizzard or light snow. It shouldn’t matter what the situation is like as long as you are getting the chance to push through the snow.
Unfortunately, you could have a situation where the snowblower is not throwing snow far enough.
If the snowblower is not throwing snow far, check the chute for potential clogging and see if the auger belt is damaged. In some cases, the engine speed might not be at its highest setting, which makes it difficult for the snow to get pushed out. The last step is to check the fuel for contamination.
It’s not easy to keep the snowblower functional and a lot of mistakes can be made when it comes to managing the snow.
It’s important to look at all aspects including how clean the snowblower is.
If you look at each angle, you will get a much better read of the snowblower and pinpoint what needs to be done to get it into the best possible shape.
Here is more on what you will have to do when the snowblower is not throwing snow far enough.
Steps To Fix A Snowblower Not Throwing Snow Far
1. Check The Chute For Clogging
When the snowblower is not throwing snow where it needs to go, you have to look at the chute.
This is where the auger is going to move the snow and it has to be clear.
If the chute is not clear, it is going to perform erratically. This is not noticeable at first but it will become quite prominent when the chute is increasingly clogged.
The best option is to see what is causing a buildup in the chute and then clear it out. Another option is to make sure you are looking at focusing on lubricating the snowblower chute.
This can be done with WD-40 and will allow the snow to slide out smoothly.
Focus on this to make sure you are getting things to move in the direction they need to.
2. Inspect The Auger Belt For Damage
You will also want to take a look at the auger belt.
The auger belt should not be damaged. This is a real issue that you are going to face when it comes to maximizing how the belt moves.
If the auger belt in the snowblower is damaged or it is too loose, this will create a scenario where the snowblower does not push out snow at the pace it needs to.
You will want to stay alert and make sure this is not happening by inspecting the auger belt in the snowblower.
If the snowblower belt is damaged, you will want to replace it.
If it is too loose, take out the belt and re-insert it into the pulley system.
3. Set The Engine To Full Speed
Sometimes, it is the snowblower’s engine that is going to be malfunctioning.
This can happen when the engine speed is not set at the rate it needs to. You will want to be patient and make sure you are looking at what the full speed is.
This is how you are going to maximize its potential.
If you do this, you are going to get the engine to work at the speed you want it to. This is how you are going to get the results that matter and the engine speed is going to yield impressive results.
4. Inspect The Fuel For Contamination
You will want to inspect the fuel for contamination.
This is how you are going to see what is going on with the snowblower and get it to run at the speed you want it to.
Sometimes, the snowblower is not going to throw the snow far enough because the fuel is unclean. This tends to happen if the snowblower has been stored for a while and then you take it out to clean the snow.
It is best to drain the fuel before you store a snowblower.
If you don’t do this, you are going to have all sorts of issues arise and that is going to include something like this.
Final Thoughts
It is important to do this if the snowblower is not throwing snow far.
If the snowblower is not throwing snow far, it’s best to see if the chute is clogged or if the auger belt has been damaged. If not, check to see if the fuel is old or contaminated as it might need to be changed. In certain situations, it will be the engine speed that has to be set to full.
This is how you are going to get enough power out of the snowblower to push out the snow. Otherwise, it will not work properly.
