The snowblower is made of various components that work in unison to push snow out of the way.
When one of those stops working, you will need to address the issue to get to the bottom of things. This is when you are going to have a situation to deal with that is not simple.
For example, you could end up dealing with a scenario where the snowblower primer bulb is not working.
if the snowblower primer bulb is not working, the main issue has to do with clogging in the fuel filter, the bulb not being set properly, or a crack in the fuel line. To fix the issue find the root cause and then replace the fuel filter. It’s also recommended to prime the bulb a few times.
If you notice this issue arose when the temperature dropped then all you are going to have to do is prime the bulb and it will push the fuel through.
The fuel might not be going through and that is when initiating the primer bulb in the snowblower is going to get the job done.
Here is more on what you are going to have to look for and do when fixing a snowblower primer bulb that’s not working.
Table of Contents
How To Fix A Snowblower Primer Bulb That’s Not Working
1. Look For Clogging In The Fuel Filter
The fuel filter can be an issue.
If the fuel is not flowing then you are going to see various components stop working. You will want to address where the issue is and why the fuel is not going all the way through as it is required to.
For the most part, you are going to be dealing with a leak or it could be clogging in the fuel filter.
When the snowblower fuel filter is clogged, you are going to notice a change in how the snowblower performs. This is assuming it works at all.
The primer bulb is also going to stop working when this happens.
The best option in a situation such as this is to replace the fuel filter in a snowblower to get it to work again.
2. Check To See How The Primer Bulb Is Set
Another detail that you are going to want to think about will be how the snowblower primer bulb is installed.
You could have a situation where the primer bulb is not in good shape.
This means it is not going to be safe and you are going to have real trouble getting the primer bulb to work as intended.
The best option is to make sure the primer bulb is managed with care. This includes looking at how it is lined up with the rest of the setup in the snowblower.
If it is loose or damaged then this is the part that is going to have to be replaced as soon as possible.
3. Inspect The Fuel Line For Cracking
Just like you are going to take a look at the primer bulb, you will also want to look at the fuel line where the fuel is flowing from.
If the fuel line is damaged then you are likely going to have a myriad of issues that are going to include potential leaking.
Leaks in a snowblower are not good and that is why checking the fuel line for cracking is a good idea. This will let you know what needs to be patched up or replaced.
4. Prime The Bulb 2-3 Times
Let’s assume you have checked everything but it is too cold outside.
This is a possible reason for the primer bulb not working in a snowblower.
The primer bulb can tend to freeze up.
The best option is to prime the bulb a few times to get the fuel to flow. This will take a bit of effort and patience but you just need to get it to the point where the fuel moves.
This is how you are going to get the fuel to the carburetor.
Sometimes all you are going to have to do is prime it a few times.
It’s best to think about your options when it comes to a snowblower primer bulb that’s not working.
If the snowblower primer bulb is not working, it is best to ensure the bulb is intact with the fuel line and that the fuel line itself is not damaged. If both are fine, check the fuel filter for potential clogging and replace it if it is damaged. Once done, prime the bulb a few times to get the fuel to flow again.
This is how you are going to get the primer bulb to work in a snowblower.
The snowblower can malfunction and this tends to happen more when it is cold outdoors. Don’t let this faze you and take the time to go through the steps in this guide.