Dealing with a situation where the snowblower won’t start is troubling.
You are likely looking at a pile of snow in front of you and the snowblower refuses to turn on. Is this a situation where you are straight out of luck or is there a way out?
You will need to figure out what to do if the snowblower will not turn over.
If the snowblower will not turn over, check the fuel to see if it needs to be topped up. Next, add a fuel stabilizer to the snowblower, wait a few minutes, and then begin cranking the snowblower. It will eventually start assuming nothing is damaged.
It is common for this to happen when the snowblower has not been used for a while.
You do not need to stress if this happens as the goal should remain to check the fuel and ensure it is topped up properly. Otherwise, the fuel is going to become an issue and you will need to figure out what to do as soon as possible.
This article is going to help take a look at how to fix a snowblower that will not turn over and why it’s important to get into this as soon as possible.
Table of Contents
How To Fix A Snowblower That Will Not Turn Over
1. Check The Fuel
Before doing anything else, you will want to look at the most common cause of a snowblower not turning over as desired.
When a snowblower won’t start after sitting, you need to think about the fuel.
How much fuel is in the snowblower? Does it need to be topped up?
If yes, this is going to be the main solution and the first thing you need to focus on. Do not inspect anything else until you are certain the fuel is set at the right amount.
A snowblower is not going to start when it does not have enough fuel in it. This often applies to machines that have been sitting for months.
Sometimes the fuel starts to show signs of aging, which is why you will also need to look at the next step.

2. Add Fuel Stabilizer
If a snowblower is not getting fuel, you will need to add a fuel stabilizer.
This is often important when you know there is not enough new fuel in the snowblower. To fix this issue, you are going to have to take a multi-faceted approach.
The first step is to add a fuel stabilizer.
You are going to want to find a good fuel stabilizer for the snowblower, add it, and then top it up with new fuel.
This should be enough to get the job done and is going to ensure your snowblower works the way it needs to.
3. Crank The Snowblower
You will want to crank the snowblower.
It is important to do this when you are sure the snowblower is in good working condition and has enough fuel in it.
This also includes the fuel stabilizer in the snowblower.
A working snowblower is one that will allow you to crank it without breaking down or sputtering. It might take a few times to do this, especially when the snowblower has been sitting around for a while.
If it still does not work, you will need to start looking at how the snowblower starts and whether or not those components are damaged.
This can happen depending on how old the snowblower is. The snowblower might even be leaking gas.

4. Check For Damage (If Necessary)
This is the last step when you have exhausted all other options surrounding the fuel.
If there is enough fuel in the snowblower then you will need to consider the idea of underlying damage. This can happen with the fuel line, the starter, or anything else that helps get the snowblower to activate once turned on.
If you don’t take the time to look into this, you are not going to get to the bottom of what’s going on.
Look into this and make sure to check for damage in the snowblower as soon as possible.
Final Thoughts
These are things you will need to go through when the snowblower will not turn over.
If a snowblower will not turn over, this means it does not have enough fuel or the fuel is old. To fix the issue, top up the fuel, add a fuel stabilizer, and then crank the snowblower until it starts. If this does not work, one of the components is damaged and has to be replaced.
It is always best to go through these steps from easiest to hardest.
This means focusing on the fuel in a snowblower before looking at damage to its components. This will save you a lot of time when you are in a situation such as this one.
Do not overlook this when it comes to doing things the right way.