Cleaning a snowblower’s carburetor is a wonderful idea and it is a good option for those dealing with a sputtering machine.
However, this can also create issues that might not have been foreseen when you were looking to maintain the machine.
An issue that can arise is when the snowblower won’t start after cleaning the carburetor.
If the snowblower won’t start after cleaning the carburetor, start by removing the spark plug and seeing if it is dry. If it is, spray a carburetor cleaner and re-install the spark plug. Once done, check the fuel shutoff valve to ensure it’s open, and then top off the fuel.
You will have to be thorough while looking at the spark plug and the fuel shutoff valve.
It is common for people to forget to turn on the valve when they are cleaning the snowblower carburetor. You need to go back and turn it on or the fuel won’t go through.
This article is going to teach you how to repair a snowblower that won’t start after cleaning the carburetor.
Table of Contents
How To Fix Snowblower That Won’t Start After Cleaning Carburetor
1. Remove and Dry The Spark Plug
It’s important to start with the spark plug.
The spark plug might have become dry when you installed it. This can happen for those who are maintaining their snowblower and want to be sure about how they approach it.
This type of mistake is the reason the machine is not starting as soon as you want it to.
The best solution is to remove the spark plug and then see if it is dry or not. If it is dry, you are going to have to find a way to lubricate the spark plug to get it to work.
It’s also recommended to make sure the spark plug is installed properly.
If it is loose, this might be the reason it is not working as you want it to.
2. Spray Carburetor Cleaner
When you have checked the spark plug and it is dry, the next solution is going to be to use a carburetor cleaner to help bring the snowblower back to how it needs to be.
Sometimes, you are going to need a spray or two of the cleaner to get the snowblower to start.
There might have been a spot you missed and that is the reason for this issue becoming a reality with your machine.
Just a few sprays will be more than enough to get everything to work again. This is assuming the issue has to do with the dryness.
3. Check The Fuel Shutoff Valve
After you have used the cleaner, you are now going to want to shift your attention to the fuel.
A snowblower is not going to start if it is not getting access to fuel. This can happen depending on how the fuel shutoff valve is set up.
You will have to be sure about the fuel shutoff valve to make sure it is in good shape and is not turned off. When the valve is turned off, this will become the reason for it not working properly.
If the valve is turned off, it’s best to make sure you turn it back on.
This will keep things safe and you will know the valve is not going to become an issue. As long as the fuel is going through, it will work out as you want it to.
4. Top Off The Fuel
You will need to look into topping off the fuel.
The reason for topping off the fuel is to make sure this is not an issue. You will never want there to be a time when fuel is not going all the way through as that can become one of the main reasons for the snowblower not starting.
Check the fuel and top it off.
This can also become a scenario where there is old fuel in the tank and that is causing the snowblower to not work as it needs to.
Look into this and make sure you top off the fuel as soon as you can.
These steps will help when it is time to fix a snowblower that won’t start after cleaning the carburetor.
To fix a snowblower that won’t start after cleaning the carburetor, it’s best to remove the spark plug and check if it is dry. If the plug is dry, spray the carburetor cleaner, and check the fuel shutoff valve to ensure it’s open. Once done, also make sure to top off the fuel.
This is going to create the perfect scenario for those who want to make sure the snowblower is functional and as clean as it needs to be.
If you don’t do this, you are not going to see appropriate results and the snowblower won’t start.