How To Use Choke On Snowblower (Solved)

The choke is one of those snowblower elements a person might not know a lot about.

You have to find out how to make the most of this part and what’s required to keep it running properly. If you don’t do this, you are not going to get the choke to run properly and this can lead to unwanted issues over time.

It’s best to learn how to use the choke on a snowblower as soon as you can.

To use the choke on a snowblower, locate the choke near the carburetor. Next, set it to the “On” position and then begin to gently release it as the engine starts. The engine should remain stable as it turns on. If it does not, engage the choke again.

It can take a few tries to get it right depending on how the choke is working.

You will want to take the time to understand your options and make sure the choke on the snowblower works the right way.

In this article, you are going to go through a few tips on how to use a choke on the snowblower.

Tips On How To Use Choke On Snowblower

1. Locate The Choke

To use the choke on a snowblower, you need to know where it is first.

This is how you are going to begin to activate the choke and ensure the engine starts the right way.

In essence, you are highly recommended to go through the owner’s manual when it comes to locating the choke on that specific model. Each machine is different and it also has a unique set of features associated with starting the snowblower.

You should be aware of them to avoid ruining the engine.

With this in mind, you will want to look near the carburetor to find where the choke is on a snowblower. It is often going to be around there.

Once you find it, you can then begin to make adjustments to it and use the choke properly.

2. Set To The “On” Position

You will want to make sure to set it to the “On” position.

This is a mistake some people make and it’s not good for the snowblower. You will want to take the time to set it properly and ensure the snowblower functions as required.

If the snowblower is not running the right way, this means it is not set in the “On” position nor is it working as you want it to.

You will want to fully engage the choke.

This is how you are going to get proper air regulation to start the snowblower’s engine.

In general, you want to make sure it is fully engaged and then see how the engine responds as the snowblower starts.

3. Gently Release The Choke

When you have activated the choke on a snowblower, the job is not done.

At this point, you are going to want to pay attention to the engine. When you realize the engine is starting, it’s time to gently release the choke.

You are not going to do this with a sudden release.

It has to be gradual and that is how you are going to make sure the engine starts smoothly. Otherwise, it is going to stutter and then stop.

Be patient and make sure to be gentle when you are working on the choke of a snowblower.

4. Engage Again If The Engine Stutters

The last step is to engage the snowblower again.

You will want to engage the snowblower properly, which means you are going to pay attention to the snowblower.

You don’t want a situation where the snowblower is disengaged.

This does happen when it begins to stutter and you release the choke on a snowblower too quickly. Don’t let this happen and make sure to engage the choke again if you feel the engine is stuttering too much.

By doing this, you are going to get the snowblower to start properly and it will begin to work as intended.

Final Thoughts

It’s best to go through these factors as you learn how to use choke on a snowblower.

To use the choke on a snowblower, it’s recommended to locate the choke near the carburetor and then set it to the “On” position. Once it is in this position, wait for the noise, and then begin to release the choke slowly as the engine starts. If the engine stutters, it’s best to engage the choke again back to the “On” position.

This is how you are going to get the snowblower to start right away and the engine is going to run smoothly at the same time.

It’s important to consider this when using a snowblower and getting it to clear out snow in the cold. Starting a cold snowblower is all about following the steps listed here.

How To Use Throttle On Snowblower (Solved)

When it comes time to manage the snowblower’s speed, it’s essential to know how to get full use of the throttle.

This is the only way to regulate the snowblower’s speed along with any manual adjustments you make (i.e. posting the snowblower slower).

A common mistake people make is to overlook these speed settings. Some snowblowers will also come with a switch that allows you to set a stable speed. This is fine and it will be listed as the “governor” on the machine.

If you want to control the snowblower’s speed, it’s best to find out how to use the throttle on a snowblower.

To use a throttle on a snowblower, it’s best to locate the throttle knob on the handlebar and then adjust the speed as required. To increase the speed, move the knob forward. To decrease the speed, move the knob backward.

For the most part, it’s far more important to know when to increase or decrease the speed. This is how you are going to get more value out of the machine and it’s going to work well in all conditions.

Here is a look at how to use the throttle on a snowblower.

Tips On How To Use Throttle On Snowblower

1. Locate The “Throttle” Knob

You will want to begin by locating the throttle knob.

A common mistake people make is to not know where the knob is. This is going to be located on the handlebar as it is supposed to be easy to adjust.

However, if you are still unsure about where the throttle is on a snowblower, it’s best to go through the owner’s manual to find its location. This will be cited in the owner’s manual along with how to use it the right way.

Your best option is to locate the throttle knob and then make adjustments.

This is going to help regulate the snowblower’s speed and is going to get it to work as you want it to.

2. Move Forward To Increase The Speed

Let’s start with increasing the snowblower’s speed.

In essence, you are going to move the throttle knob forward. The more you push it forward, the more you are going to increase the machine’s speed.

This is a general view of how to get the engine to push more.

However, you also need to know when to increase the snowblower’s speed so you don’t misuse it. In general, the best time to do this is with deeper snow.

You are going to need the machine to push more and increasing the speed is a great way to power through the deeper snow.

Look into this to make sure you are getting the snowblower to run safely.

3. Move Backward To Decrease The Speed

You will also want to take the time to look at the opposite adjustment.

For example, what if you are thinking about decreasing the snowblower’s speed? What is your option then?

You will want to do the opposite.

This means you are going to go to the throttle knob and move it backward. As soon as you push it, the speed is going to decrease.

Continue pushing it as you want to slow things down even more.

When it is best to do this?

It is best to do this on lighter snow as it is going to allow the snowblower to go through and clear out the snow without too much effort.

4. Use The Owner’s Manual

You will want to take the time to use the owner’s manual.

The owner’s manual is a great resource in a situation such as this. A lot of people don’t take the time to look at what the manual says and that’s a real mistake.

It’s important to use the manual safely.

This means reading more into how the snowblower works along with how to use the throttle the right way. It’s important to make sure you are getting more out of the owner’s manual.

Focus on this and ensure you are getting the snowblower to work the right way.

Final Thoughts

Look into these details as you find out how to use the throttle on a snowblower.

To use the throttle on a snowblower, locate the throttle knob on the handlebar. Move it forward to increase the speed or move it back to decrease the speed.

This is how to make sure the snowblower’s speed is in line with what you require.

For example, if you are cleaning deep snow with a snowblower, you will want to increase the speed to power through. On the other hand, lighter snow on the ground is not going to need this type of speed and won’t be optimal for how the machine is running.

Focus on this as you begin to use the snowblower the right way.

Snow Blower Flywheel Is Stuck! (Fixed)

When the snow blower starts to break down, it’s essential to figure out the part that is bothering you.

This is going to help pinpoint the right strategy to fix the snow blower and make sure it starts working as needed.

You don’t want a situation where the snow blower flywheel is stuck.

If the snow blower flywheel is stuck, start by lubricating the flywheel with WD-40, remove any debris, and top up the engine oil. It’s also essential to warm the engine if it is cold outside.

Since a snow blower is going to be used in the cold, it’s possible the temperature has dropped to the point where it’s impacting how the snow blower functions. Do not let it get to this point as the goal should be to warm it as much as you can.

This article is going to help showcase how to fix a stuck snow blower wheel.

How To Fix Stuck Snow Blower Flywheel

1. Lubricate The Flywheel

The flywheel is integral to figuring out how the snow blower works.

You don’t want a situation where the flywheel is lubricated poorly as that is when things won’t work out as intended. You have to take the time to lubricate the flywheel and make sure it’s going to continue to move as required.

Sometimes, it is not going to be lubricated and that is going to cause it to cease.

This is one of those things that you have to figure out as soon as you can.

You don’t want a situation where the flywheel starts to hold up and then gets stuck. It needs to be well-lubricated for it to continue to turn as required.

What should you be using to do this?

You should be looking to use WD-40 as this is going to do a good job of keeping things lubricated. The snow blower flywheel is going to work the right way and you will feel confident in using it in the winter.

2. Remove Debris

Is there any debris on the flywheel?

Sometimes, you are not going to be keeping up with maintaining the machine and that is going to hold you back. It’s important to make sure you are removing any debris that is trapped in the flywheel as that is going to cause it to become stuck.

Be thorough with what you are doing and ensure you are removing the debris as best as you can.

It’s important to remove the debris carefully and avoid a situation where things get worse with time. This is the biggest mistake people make and that is what you should be avoided at all costs.

Get rid of the debris and then start looking at what is causing the flywheel to remain stuck. In some cases, just removing the debris is more than enough to get the snow blower flywheel working again.

3. Check The Engine Oil Level

To get a snowblower flywheel unstuck, it’s important to pay attention to the engine oil level.

It’s essential to see what’s going on with the engine oil and how to get it to the right level in a situation such as this.

You don’t want it to get to the point where the engine oil is not at the right level. This is going to lead to major issues with time and it’s something you are going to want to address as soon as you can.

Always top up the snowblower engine oil.

4. Warm The Parts If It’s Cold Outside

You will want to warm the parts if it is cold outside.

It is possible the temperature has dropped to the point where it’s simply too cold for the engine to keep moving. It is also likely the snow blower flywheel is not turning at the rate it needs to.

If it is stuck, you might notice ice in there.

This is due to the snow blower flywheel getting iced up to the point it’s not going to work at all. You have to take the time to warm the parts if it is cold outside.

This is essential and it is the only way to get the snow blower to work the right way.

Final Thoughts

This is how you can fix a stuck snow blower flywheel.

To fix a stuck snow blower flywheel, start by lubricating the part with WD-40 and then removing any debris that’s stuck in there. It’s also wise to top up the engine oil and then make sure the snow blower is warmed up if it is too cold outside.

Yes, it is possible for a snow blower flywheel to stop working in a situation where it’s too cold. Always look to warm it up and store it inside due to this reason.

A snow blower that does not move can have this issue. Look into everything and then begin using the snow blower as soon as you can.

Can You Put A Snowblower On A Zero Turn Mower? (Explained)

Using a snowblower the right way means having the right setup.

It’s easy to make mistakes in a situation such as this and not get the snowblower to function properly. This includes not having it installed the right way or not maximizing its potential.

One option is to use a zero turn mower.

Can you put a snowblower on a zero turn mower?

Yes, you can put a snowblower on a zero turn mower. It’s recommended to do this by using the right attachment and then connecting it to the mower’s hitch. Once it is secure, connect the power from the zero turn mower to the snowblower. It should be functional now.

It’s essential to have the attachment set up the right way.

This is one of the biggest issues a person is going to face when it comes to dealing with a mower that does not work properly.

This article is going to show you how to put a snowblower on a zero turn mower.

How To Put A Snowblower On A Zero Turn Mower

1. Use The Right Attachment

You have to start with the right attachment or the snowblower is not going to lock into place.

To do this, you have to get the attachment designed for your snowblower. If you are not doing this, the attachment is not going to hold the machine and it is not going to work well.

In general, each make and model is going to have a specific attachment made for it. This is the attachment you are going to have to go out and get as soon as you can.

Focus on this and the right attachment is going to work like a charm. It is essential to do things the right way and ensure the attachment is going to turn out as you want it to.

2. Connect To The Mower’s Hitch

You also have to take the time to focus on how the attachment is going to link to the mower.

It is important for you to set up the attachment properly.

This is going to include having it set up with the mower’s hitch. If you do this, it is going to lock into place and then you are going to have no trouble getting the machine to run as required.

Be patient as you connect it to the mower’s hitch and double-check to ensure it does not budge. This is key because it is going to come undone if you are not careful about how it is connected to the zero turn mower.

The best option is to first check the attachment to ensure it is the right size and then link it to the mower. This will go a long way in keeping things in place as required.

3. Connect Power From Zero Turn Mower To Snowblower

You will have to look at all options when it comes to a situation such as this.

The goal should be to connect the power from the mower to the snowblower. This is going to create a link between the two that is going to ensure it runs as required.

Always think about how the mower is going to move and that is going to include the power that comes with the link.

If you do this, it is going to work like a charm and you will notice it is going to stay in place as required too. This is what matters in the end.

4. Use The Snowblower

To connect a mower to a snowblower, you will have to make sure to test it.

This is important as it is the only way you are going to find out whether or not the connection is secure. If you are not taking the time to use the snowblower properly, you are going to have a situation where it does not work out as intended.

It’s essential to use the snowblower properly.

It might also be important to ensure there is nothing inside the attachment such as debris. It might make it harder to test the snowblower.

Clear it out beforehand.

Final Thoughts

Can you put a snowblower on a zero-turn mower?

You can put a snowblower on a zero-turn mower. To do this the right way, find the right attachment to ensure the snowblower locks on. Next, attach it to the mower’s hitch and then connect the power between the two machines.

This will ensure the two are interlinked and works as one.

It’s important to be thorough when using the snowblower and that includes understanding how the snowblower attachment works.

If you do this, you are going to see great results and it will turn out as you want it to. Focus on this and you will enjoy how things turn out with the snowblower.

Guide On Snowblower Rubber Flap Mod (Explained)

Snowblowers are refined machines but that does not mean simple modifications can’t be made.

It’s common for snowblower owners to want to optimize how the machine runs. This is a great idea when there is snow that does not go into the chute and continues to fall out.

If that is the case, it’s time to look at setting up a snowblower rubber flap mod. This modification is designed to direct the snow into the chute by setting it up in front of the auger.

To set up a snowblower rubber flap mod, start by measuring the auger and then cut the rubber to size. Once down, attach the rubber flap to the housing using screws. It should be tight against the housing. At this point, adjust the rubber flap into position and test it.

It’s important to take your time with installing the snowblower rubber flap mod. It needs to be done with care to make sure the snow does go into the chute and does not get pushed away.

You will want to use the snowblower to test the snowblower rubber flap mod and see how it works.

This guide will go deeper into showing you how to set up the snowblower rubber flap mod and get it right the first time around.

How To Set Up Snowblower Rubber Flap Mod

1. Take Measurements

It’s important to start with the measurements.

In general, the snowblower rubber flap mod has to be based on how big the auger is. You are going to be setting it up with the auger housing, which means it needs to cover the portion properly.

If it is not, the snow is still going to go by the wayside.

You have to be meticulous with the measurements and then use those measurements to mark the rubber. The material that you are going to be using is only good if it is set up the right way.

Look into this by taking the measurements as required. This is how you are going to see the results that you desire and it will turn out great.

2. Cut The Rubber Flap

Cut the rubber flap and make sure things are done the right way.

This is a mistake that’s often made because you are going to have the measurements and then not cut it the right way.

Mark the rubber and then begin to cut it.

If there are any issues with how the rubber flap is cut, this is going to impact the snowblower’s performance. Take your time with the markings and then begin to cut through the material.

3. Attach The Flap To The Housing Using Screws

Now it is time to attach the snowblower rubber flap mod.

To do this, you are going to take the newly cut rubber flap and begin to focus on the auger housing. The rubber flap is going to sit on the auger housing.

To do this, you will notice there has to be a way to attach it securely.

The best option in a situation such as this is to use screws. These are going to act as the fasteners that will hold the snowblower rubber flap mod in place.

Look into this when you are making sure it does not move.

You can also use an adhesive but it is generally recommended to stick to screws and bolts. These will hold better but a combination solution is welcome too.

4. Adjust The Rubber Flap To Position

Now you are going to begin to see how the rubber flap works with the snowblower.

In general, you will want to have it set up in the right spot immediately. However, it’s possible you will still want to adjust it a bit to get the angle right.

This is only done when you use the snowblower for a bit and see how it does with the snow. Is it getting the snow to go where it needs to into the chute?

This is the question that is going to dictate the direction you go in with the new snowblower rubber flap mod.

Final Thoughts

Look into this guide on the snowblower rubber flap mod to learn more about how it’s done and what’s needed.

To set up a snowblower rubber flap mod, it’s best to start by measuring the auger housing and then cutting the rubber to size. With the rubber flap in hand, attach it to the housing using screws and/or an adhesive. Once done, adjust the rubber flap and test it in snow.

This process is ideal for those who are tired of the snowblower pushing away at snow or breaking down because it does not do well with the snow.

If you take the time to move forward with this modification, the snowblower is going to perform better.

Common Ariens 11528le Problems (Explained)

When it comes to some of the more well-renowned snowblowers on the market, it’s always important to pay attention to the value of an Ariens snowblower.

This is a type of snowblower that stands out but this does not mean it’s always going to work out as you want it to.

There are specific Ariens 11528le problems that you are going to want to account for.

Some Ariens 11528ie problems to consider include a loose belt, starting issues, a clogged chute, and/or leaking oil. It’s best to inspect the damaged parts right away and replace them if needed. On the whole, this is a reliable snowblower made by a trusted manufacturer.

Ariens has been around for a long time as a heralded brand and continues to deliver value. Yes, there are Ariens 11528le problems that you will need to consider but they are just like any other snowblower on the open market.

This article is going to help highlight some of the main Ariens 11528le problems that you should keep in mind.

Main Ariens 11528le Problems

1. Loose or Damaged Belt

This often ends up happening when the Ariens snowblower begins aging.

It is common for the wear and tear of regular use to start creating issues with how the Ariens snowblower runs. This includes a situation where the snowblower belt begins to malfunction.

There are two ways this can occur.

The first way is going to be the snowblower belt becoming too loose. This is a serious issue that is not easy to manage and you are not going to enjoy how things turn out when it comes to doing things the right way.

If it is too loose, you will need to take out the snowblower belt and then re-insert it. This is going to get it back on track.

The second way is going to be when the belt simply breaks.

This is going to be a serious issue because the snowblower is going to come to a stop and it won’t clear out snow any longer.

The best option in a situation such as this is to replace the snowblower belt right away.

2. Starting Issues

Since this model has an electric starter, it’s possible for the power to give out.

This creates a situation where the power is not going through and that causes the Ariens snowblower to not start at all.

You will often hear a clicking noise when this happens as the snowblower attempts to start. If it does not spark, it is not going to run.

The reason this happens can do with a damaged or blown spark plug. The best option is to replace the spark plug and make sure there is enough power going through to the Ariens snowblower once it is time to turn it on.

3. Clogged Chute

When you are moving the Ariens snowblower around, it’s important to understand while the machine is powerful, it is not invincible.

This means it needs to be handled with care when there is a lot of snow on the ground.

It’s possible for the chute to get clogged when there is debris on the ground or too much ice. This begins to clog up inside the chute as it is pushed in by the auger.

You have to take the time to lubricate the Ariens snowblower to make sure this does not happen.

4. Oil Leak

This is possible when there is a crack in the tank or there is something wrong with the line that is running through holding the snowblower’s oil.

A lot of people make this mistake early on as owners.

They will overfill the snowblower and that is going to cause the oil to leak. Do not do this and always read the owner’s manual to know what is right for the snowblower.

If you are not doing this, the oil is going to start leaking from the snowblower as soon as you move it. In some cases, it is going to leak regardless of what you are doing with the snowblower.

It could even be sitting in the garage and it’s going to leak.

Final Thoughts

It’s these Ariens 11528le problems that will stand out for those who want to make sure the snowblower functions as required.

When it comes to the main Ariens 11528le problems, it’s common to see oil leaks, starting issues, clogged chutes, and/or a damaged snowblower belt. It’s recommended to maintain the snowblower to ensure these issues don’t arise.

For the average snowblower owner, it’s not going to happen. You will only see these issues crop up when you have overfilled the tank or the snowblower has started aging.

As long as you care for the snowblower, it’s going to remain in good shape and continue to run properly as needed.

Can I Use SAE 30 In My Snowblower? (Solved)

Putting the right oil in a snowblower is essential.

Most people do get confused when it comes to putting oil in a snowblower because they don’t know which type is going to work the best.

Don’t let yourself get into this situation because that’s how you are going to end up with subpar results. The better option is to take the time to see which type of oil is safe for the snowblower and go from there.

This includes wondering, can I use SAE 30 in my snowblower?

Yes, you can use SAE 30 in a snowblower. This is a safe oil type for snowblowers and will help maximize its performance. However, it’s still recommended to read the owner’s manual for your snowblower to find out what the ideal oil type is. Make sure to pour the right amount of SAE 30 when filling up the tank and let the snowblower run for a while.

It’s important to follow this advice when using SAE 30 oil in a snowblower. Otherwise, your snowblower is not going to perform at the rate you want it to when it’s snowing.

Here is a guide on how to use SAE 30 oil in a snowblower and what to account for.

Tips On How To Use SAE 30 In A Snowblower

1. Read The Owner’s Manual

You have to start with the owner’s manual.

This is one of the biggest mistakes people make and it is not a good situation to be in. You have to take the time to read the owner’s manual and get a better read on how long it is going to last.

This is where the real issue starts.

If you automatically put SAE 30 in a snowblower, it should run well. However, there are some makes and models that are not going to do well with this type of oil. It might not be optimized for this type of oil, which means you have to find what is going to work well for that specific model.

A lot of people don’t do this and that is when mistakes are made.

You have to ensure the snowblower is going to run the right way and that includes using the right type of oil.

2. Pour In The Right Amount

You will have to take the time to pour in the right amount.

This is one of the mistakes people make and it is not a good situation to be in. You have to ensure you are pouring the right amount and taking the time to adapt to what you are dealing with.

This is key.

If you are not pouring in the right amount of SAE 30 oil in a snowblower, you are not going to see the results that you are going for.

It’s essential to think about this and then see what your options are.

3. Let The Snowblower Run

You will have to let the snowblower run for a bit.

This is a common mistake that’s made by people and it’s not a good situation to find yourself in. You have to take the time to let the snowblower run a bit.

By doing this, you are going to know the results will be good and that the oil is going through the machine as required.

If you attempt to use the snowblower right away, it will create a situation where the machine does not run at the speed you need it to.

4. Always Use Fresh Oil

What type of SAE 30 oil are you putting in the snowblower?

This is a good detail to think about because you have to use fresh oil. This is the only type of oil that needs to go in the snowblower.

If you are not using fresh oil, it is not going to bode well for the snowblower. The snowblower is going to start sputtering as soon as you do this and that is not the method you want to take for a situation such as this one.

It is better to always use fresh SAE 30 oil for a snowblower.

Final Thoughts

Can I use SAE 30 in my snowblower?

Yes, you can use SAE 30 in a snowblower. This is a recommended oil type for machines such as snowblowers. However, it’s still recommended to consult with the owner’s manual to see if it requires another type of oil to maximize performance. It’s also essential to only use fresh oil and let the snowblower run for a bit before using it.

This is how you are going to maximize how the snowblower performs and it is going to turn out the way you want it to.

A lot of people don’t do this and then struggle when it comes to getting more out of their snowblower.

Start here and feel confident with how the snowblower is going to run.

Tecumseh Engine Blowing Oil Out Breather (Fixed)

This is not a good situation to find yourself in when it comes to the Tecumseh snowblower.

You will want to start using the snowblower but it’s not going to work out due to the leak. A leaking snowblower is the last thing you are going to want to see happen but it is possible when you have overdone the oil.

This is when it becomes important to find out why the Tecumseh engine blowing oil out of the breather.

The Tecumseh engine is blowing out of the breather because there’s too much oil in the tank. To fix the issue, drain the oil, add the correct amount, and then use a dipstick to recheck the level to ensure it’s right. It’s also recommended to check the air filter for damage and replace it if necessary.

It is not good for the engine when there is too much oil in the Tecumseh snowblower. You will want to address this issue as soon as you can and don’t let it get worse over time.

If you are not doing this, the snowblower is going to break down and that is not a good thing over time.

Here are the main options for those who want to fix the Tecumseh engine blowing out of the breather.

Tips On How To Fix Tecumseh Engine Blowing Oil Out Of The Breather

1. Drain The Oil

The main issue has to do with too much oil in the snowblower.

If this is the case, the oil is going to start coming out of the breather and that is when you have to address the leaking right away.

So, what are you going to do?

You have to start from square one.

This means you are going to drain all of the oil in the snowblower right away. This is the only way to get a fresh start with the snowblower and then add new oil.

Some people will attempt to take out a little amount of oil and that is fine too. However, it is much easier to drain all of it and then start from scratch to get it right the first time.

2. Use Dipstick To Recheck The Oil Level

If there is too much oil in the snowblower, you will now want to put in new oil.

After the new oil is in the snowblower, it’s essential to recheck the level. You are going to do this with the help of a dipstick.

The dipstick is going to let you take a look at the current oil level in the snowblower and reassess your position. If there is still too much oil, you are going to want to drain a little bit.

If there is too little oil in the snowblower, you are going to have to pour in more.

3. Check The Air Filter For Damage

You will need to take the time to check the air filter.

This is a common worry when it comes to how the air filter works and the results you get from it.

If the oil was not drained quickly enough and the snowblower was running, it’s possible the air filter got damaged. This is why you are going to want to take the time to inspect the air filter in the Tecumseh snowblower to see how it is doing.

If it is doing fine, you can move forward with the next step.

4. Re-Test The Snowblower

This is the final step in the process.

The idea here is to make sure the oil level is correct in the snowblower and then let it run for a bit. The reason you are going to let it run is to make sure the snowblower stays safe and you don’t have a situation where it gets damaged.

The better option is to let it run and then start using the snowblower after you are sure it is not making noise or is damaged.

This is often why you are going to want to take the time to see how the engine in the snowblower is doing along with the air filter.

Final Thoughts

These steps will help as you fix the Tecumseh engine blowing oil out of the breather.

If the Tecumseh engine is blowing oil out of the breather, it’s due to there being too much oil in the machine. Start by draining all of the oil, putting in fresh oil correctly, and then letting the snowblower run for a bit before use. It is also ideal to check the air filter for damage and replace it if required.

It is possible the air filter got damaged in the snowblower due to there being too much oil.

This does happen and it is important to replace the air filter in the snowblower as soon as possible. Otherwise, the snowblower is going to start making noise and might stop midway.

Are Snow Blower Tire Chains Worth It? (Solved)

Using a snow blower means you are going to be dealing with a wide array of conditions.

Some people are going to deal with average snow, which means it is easy to take out the snow blower and start to move it around. However, this might not be the case when you are living with deep snow and the snow blower has to navigate these conditions.

If these are the conditions you are dealing with, you will have to figure out how to get more grip for the snow blower. To do this, you will want to ask, are snow blower tire chains worth it?

Snow blower chains are worth it in conditions that are icy, full of snow, and hilly. This is where the chains come in handy. They offer improved cleaning performance, enhanced traction, and improved performance. It is also common for there to be added stability with the snow blower chains.

It’s essential to look into adding snow blower chains into the mix because they will offer the type of traction needed in icy conditions.

This article is going to showcase the advantages of snow blower tire chains.

Benefits Of Snow Blower Tire Chains

1. Better Cleaning

It starts with cleaning using the snow blower.

If you are hoping to deal with deep snow and it is time to take out the snow blower, you will want to make sure things are as clean as they need to be.

This means you can get into those tough spots without missing an inch. This is not always possible when there are no snow blower chains in place.

The snow blower chains will make things easier and you are going to see tremendous results when it comes to ensuring the cleaning is in line with what’s required.

Focus on using the snow blower in different conditions because the cleaning is going to be improved. It will become easier to manage your driveway because the snow is going to get thrown out quickly. This is what matters most.

2. Enhanced Traction

It is essential to figure out why you are adding snow blower chains in the first place.

The entire premise of snow blower chains is to make sure you have more traction. You are going to find it easier to move on ice and it is going to let you get to where you need to be with the snow blower in front of you.

If it is too icy and you don’t have snow blower chains, it becomes difficult to move in a straight line. You are going to start slipping and that is not good when it comes to the snow blower.

Focus on traction when it comes to keeping things as safe as they need to be. It is the only way you are going to get things to last.

3. Efficient Performance

Always think about efficiency.

This is one of the biggest mistakes a person makes because you don’t want to waste time while blowing snow.

Let’s assume you are taking the time to clear out snow on a driveway. You will want to make sure it is done as efficiently as possible.

You don’t want to waste time and you also want to make sure you are not moving at odd angles because it’s tough to remain stable. This does happen when it is icy and that is why taking the time to add snow blower chains is a must.

Look into this when it comes to seeing the results that you want.

4. Improved Stability

You will have to look at how it feels to use the snow blower.

If it is icy in front of you, the stability is going to go down with a regular snow blower. It is not going to move in the direction you want it to and it is going to take longer to get the job done.

This does happen when you are not taking the time to add snow blower chains.

If you do have snow blower chains, the stability is going to go up. You will find it easy to move on all types of surfaces even if it is icy out there.

Final Thoughts

Are snow blower tire chains worth it?

Yes, snow blower tire chains are worth it. These tire chains are worth it because they offer increased stability, better performance, and improved traction. If it is time to remove snow in icy conditions, the chains go a long way in making things easier.

Snow blower tire chains are the best because they will add value right away.

Even in tough conditions, the snow blower is going to work like a charm and yield impressive results. This is what matters the most to those who want to ensure the snow blower works as required.

How To Adjust Speed On Ariens Snowblower (Solved)

When using the Ariens snowblower, it’s essential to know how to use its settings.

You will have to account for a few things while doing this including the conditions. If you don’t take the time to analyze the amount of snow on the ground or the type of surface you’re dealing with, it’s easy to use the wrong speed setting with the Ariens snowblower.

This is why learning how to adjust the speed on an Ariens snowblower is a must.

To adjust the speed on an Ariens snowblower, start by using the knob on the handlebar. Turn the knob left or right to increase and decrease the speed. Choose a higher speed setting for heavier snow and always test the snowblower once the setting is locked.

In some cases, you will have to adjust the speed setting for the Ariens snowblower based on different parts of the driveway.

This does happen and it has a lot to do with the way a snowblower moves through the snow. If you are not careful, it’s easy to damage the snowblower or for it to get stuck in the snow.

This article is going to look at how to adjust the speed of an Ariens snowblower.

Steps On How To Adjust Speed On Ariens Snowblower

1. Use The Knob On The Handlebar

You will want to begin with the handlebar.

The only way you can adjust the speed of an Ariens snowblower is by locating this knob. It is specifically designed for you to go through the speed settings.

In essence, this is going to be a small knob that is going to be conveniently located in a spot that is easy to reach.

You are going to use this knob as a way to pinpoint what speed setting you are looking for.

Once you locate the knob, you are then going to begin to go through the speed settings.

2. Flick Through The Speed Settings

For the most part, you are going to have a few options when it comes to the speed with an Ariens snowblower.

Don’t rush while flicking through.

You will want to turn the knob and then look at the symbol in front of you. This is going to let you know which way to turn the knob when looking to increase or decrease the speed. Follow this to get it right the first time.

You are then going to take the time to be patient when it comes to managing the speed setting as best as possible.

It’s essential to figure out the various speeds and how they are going to impact your snow-blowing experience.

Don’t assume one speed is going to work well just because it seems like it is faster. This is not always going to work out because of how much snow is on the ground.

It is okay to go with a lower speed setting when there is less snow on the ground.

3. Test The Snowblower

Now, it is time to test the snowblower.

In essence, you are going to want to have the setting in place and then begin to work on the snowblower. This is the best way to make sure the snowblower works well and you get the results that you are hoping for.

Take your time when using the snowblower.

You have to understand what’s required to get the snowblower to work well. If you don’t do this, the snowblower is not going to run properly.

4. Continue Making Adjustments (If Necessary)

You will now want to start making adjustments.

If you are not making adjustments, you will not see appropriate results. This is a common mistake that is made because it is not always right to go with one speed setting and then assume this is enough.

The Ariens snowblower is going to break down if that is the strategy you wish to employ.

You will want to take a step back and continue to respond to how the snowblower does in front of you. This is a must.

Final Thoughts

It’s best to go through these details as you figure out how to adjust the speed on an Ariens snowblower.

To adjust the speed on an Ariens snowblower, start by finding the knob on the handlebar. This is what controls the speed. Now begin turning the knob left or right to change the speed. Always change the speed based on the conditions. If it is deep snow, a higher speed setting will do better.

It is important to be ready to adjust the snowblower in these conditions.

This is how you are going to get the snowblower to work well and it is not going to break down on you. A lot of snowblower owners rush this part of the process and then regret it later when the machine does not work.