This is not a good situation to find yourself in when it comes to the Tecumseh snowblower.
You will want to start using the snowblower but it’s not going to work out due to the leak. A leaking snowblower is the last thing you are going to want to see happen but it is possible when you have overdone the oil.
This is when it becomes important to find out why the Tecumseh engine blowing oil out of the breather.
The Tecumseh engine is blowing out of the breather because there’s too much oil in the tank. To fix the issue, drain the oil, add the correct amount, and then use a dipstick to recheck the level to ensure it’s right. It’s also recommended to check the air filter for damage and replace it if necessary.
It is not good for the engine when there is too much oil in the Tecumseh snowblower. You will want to address this issue as soon as you can and don’t let it get worse over time.
If you are not doing this, the snowblower is going to break down and that is not a good thing over time.
Here are the main options for those who want to fix the Tecumseh engine blowing out of the breather.
Tips On How To Fix Tecumseh Engine Blowing Oil Out Of The Breather
1. Drain The Oil
The main issue has to do with too much oil in the snowblower.
If this is the case, the oil is going to start coming out of the breather and that is when you have to address the leaking right away.
So, what are you going to do?
You have to start from square one.
This means you are going to drain all of the oil in the snowblower right away. This is the only way to get a fresh start with the snowblower and then add new oil.
Some people will attempt to take out a little amount of oil and that is fine too. However, it is much easier to drain all of it and then start from scratch to get it right the first time.
2. Use Dipstick To Recheck The Oil Level
If there is too much oil in the snowblower, you will now want to put in new oil.
After the new oil is in the snowblower, it’s essential to recheck the level. You are going to do this with the help of a dipstick.
The dipstick is going to let you take a look at the current oil level in the snowblower and reassess your position. If there is still too much oil, you are going to want to drain a little bit.
If there is too little oil in the snowblower, you are going to have to pour in more.
3. Check The Air Filter For Damage
You will need to take the time to check the air filter.
This is a common worry when it comes to how the air filter works and the results you get from it.
If the oil was not drained quickly enough and the snowblower was running, it’s possible the air filter got damaged. This is why you are going to want to take the time to inspect the air filter in the Tecumseh snowblower to see how it is doing.
If it is doing fine, you can move forward with the next step.
4. Re-Test The Snowblower
This is the final step in the process.
The idea here is to make sure the oil level is correct in the snowblower and then let it run for a bit. The reason you are going to let it run is to make sure the snowblower stays safe and you don’t have a situation where it gets damaged.
The better option is to let it run and then start using the snowblower after you are sure it is not making noise or is damaged.
This is often why you are going to want to take the time to see how the engine in the snowblower is doing along with the air filter.
These steps will help as you fix the Tecumseh engine blowing oil out of the breather.
If the Tecumseh engine is blowing oil out of the breather, it’s due to there being too much oil in the machine. Start by draining all of the oil, putting in fresh oil correctly, and then letting the snowblower run for a bit before use. It is also ideal to check the air filter for damage and replace it if required.
It is possible the air filter got damaged in the snowblower due to there being too much oil.
This does happen and it is important to replace the air filter in the snowblower as soon as possible. Otherwise, the snowblower is going to start making noise and might stop midway.