The first sign there’s something wrong with the pool water is when it looks hazy.
This means there is a change in the water’s pH.
At this point, you will need to address the issue and get to the bottom of why there is so much cloudiness in the swimming pool.
One reason can be when there is too much flocculant in the pool.
If there is too much flocculant in the pool, it’s best to stop the filtration system and let the particles drop to the bottom of the pool. Once the particles drop, use a pool vacuum to remove them. It’s also important to be on the lookout for clumps floating around.
The water’s pH level is going to change when there is too much flocculant in the pool. While removing flocculant in the pool is great, you do need to have a pH testing kit in hand.
This is how you will know whether or not it is in good shape after your cleaning.
Let’s take a look at what you should do when there is too much flocculant in the pool.
Table of Contents
Steps On Managing Too Much Flocculant In Pool
1. Stop The Filtration System
You will want to start by looking at the filtration system.
The filtration system needs to stop running.
If it continues to run, the particles will not drop to the bottom of the pool as required during this process. You will want to be careful while managing the filtration system in the pool and make sure to turn it off completely.
Once you do this, you are now going to be waiting.
This is going to ensure the particles go to the bottom of the swimming pool and then you can begin the cleanup phase.
2. Use Pool Vacuum To Remove Particles
What are you going to do when cleaning up the particles at the bottom of the pool?
The strategy is to use a pool vacuum.
Since the filtration system is not going to be running, you are now going to have the chance to use a pool vacuum to remove the particles. This should not take a long time because you have waited long enough for the particles to drop.
Be patient while you are using the pool vacuum.
It’s common for there to be spread-out particles that are not easy to reach first. As long as you are patient, you will get to them.
What about particles that are difficult to reach with a pool vacuum?
You can use a manual solution such as a pool net. This might take much longer but it will do the job in those hard-to-reach spots.
3. Check For Clumps
You should always check for clumps.
It’s common for clumps to form in the swimming pool when there is too much flocculant in the water.
This means you are going to want to be on the lookout for these clumps as soon as you begin. In some cases, these clumps are going to be present right away when the pool water is hazy. In other situations, it is going to form after the filtration system is off.
Continue to keep your eyes open as you look to find those clumps.
Your goal will be to remove those clumps from the water as soon as you can.
4. Test The Water’s pH
It’s essential to test the water’s pH in a situation such as this.
You will need a pool testing kit to keep track of what’s going on with the pool water. This will let you get a better read on what needs to be done to maximize the water quality.
If you are not testing the water pH level, you might not know when to turn on the filtration system again. Take the time to test the water’s pH and ensure it’s as stable as you need it to be.
It should hit a safe level that is going to be ideal for you to use the pool again.
This is all you will need to know as you work on taking care of a situation where there is too much flocculant in the pool.
If there is too much flocculant in the pool, start by turning off the filtration system and wait for the particles to drop. Once done, clean the particles from the bottom of the pool using a vacuum or pool net. Always keep an eye out for clumps.
If you do this, you are going to feel confident in how clean the pool is. This is also going to include testing the pH in the swimming pool and ensuring the pool filter is running the right way.
As long as you do this, you will be happy with how the pool water turns out at the end of the process.