It is not easy to deal with a situation where the towing trailer is not set at the right height.
This can happen and it will lead to issues concerning how you move the trailer. You will not want it to be off by a lot as it can lead to unnecessary swaying.
Some people will assume the height difference is not too much and it won’t be a problem. However, it is proven to become an issue over the long haul as it will overload the axles.
When the towing trailer nose is high, it will lead to all sorts of issues.
If the towing trailer nose is high, start by measuring the height difference. With the number in mind, invest in an insert to level the trailer or lower the towing vehicle to bring it back to balance. Do not drive until it is level.
This is important because you are going to do unwanted damage to the axles when the towing trailer nose is too high.
The only time you might be able to get away with it is when the difference is a few inches. If it is more than this, it will lead to damage.
This article will give you advice on how to go about managing a towing trailer nose that is too high.
Table of Contents
Tips If The Towing Trailer Nose Is High
1. Measure The Height Difference
If the trailing is swaying while towing then you are likely dealing with a significant height difference. This is not a good sign.
You will want to measure the height difference to see what it is.
If it is under 2″ then you are going to be fine but it will only be a short-term reality. You will want to fix the issue before you overload the axles due to the imbalance.
You should always keep this number in mind to make sure you know how much to adjust the towing trailer and its equipment.
Getting the trailer tongue angle right is important and it is these measurements that will matter the most.

2. Invest In An Insert To Level The Trailer
One solution you are going to have to level a towing trailer is to look at adding an insert.
The insert is going to help balance out how the trailer is set up.
It is going to help manage the height and make sure it is even with the trailer. This is a must and it is what you should be aiming for if you can’t find any other way to lower the tow vehicle.
This will come down to what your options are more than anything else. Think about this to get the type of results that will work out as you want.
3. Do Not Drive Until It is Level
The one mistake you are not going to make is to start driving.
The tow vehicle should not be moved until it is level.
This is a must when the towing trailer nose is too high. This is unsafe and you are not going to want to risk it due to the pressure it’s going to put on the axles. The axles are going to take the brunt of the load and it will cause them to weaken.
This is not a risk worth taking and it will do a considerable amount of damage over time.

4. Lower The Tow Vehicle
Another option that is going to be available to you is to lower the tow vehicle.
The reason to lower the tow vehicle is to help bring it in line with the load. This is how you are going to get to reduce the height difference that you measured in the first step.
Some tow vehicles are going to let you do this and it is best to look into this option due to how quick it will be.
Do not start driving until you have taken the time to do this.
When you are done, retake the measurements to make sure the towing trailer nose is not high any longer. When you are certain that is the case, you can then move the tow vehicle.
Final Thoughts
These tips will go a long way when the towing trailer nose is high.
If the towing trailer nose is too high, it is best to measure the height difference, lower the tow vehicle, and/or add an insert under the trailer to balance the height. This is how to level the trailer.
It is important to take your time with the measurements to ensure you are not overloading the axles. This is how you are going to end up with extensive damage and it will wear down the axles.
It is better to be patient here and make sure things are done the right way with the trailer.