When the Traeger is running as required, it is going to get to the set temperature right away.
You will not have to wait long and the grilling experience is going to be world-class. This is imperative when it comes to getting full value from the fan and ensuring it turns out as you want it to.
The right Traeger fan is going to be efficient, and safe and is going to ensure the pellet grill keeps running throughout the year.
If the Traeger fan is not working, it’s time to pinpoint what the issue is.
If the Traeger fan is not working, check for a “Fan Disconnected” message. This means tightening the orange and white wires near the fan. Also, look for any grime on the fan and get rid of it with a thorough cleaning session. If the fan is melted, it will have to be replaced.
In most cases, the Traeger fan is not going to be damaged.
It is rare for this to happen but you should still be on the lookout for such an occurrence.
This guide is going to look at how to fix a Traeger fan that is not working.
Table of Contents
How To Fix Traeger Fan That’s Not Working
1. Check For A “Fan Disconnected” Message
It is common for the Traeger to alert you when something is off.
This is a high-tech pellet grill that has been designed with care. You are going to have numerous alerts pop up when something is not working as it should.
These alerts on the Traeger are important and you should pay attention to them as soon as possible.
Once done, you are going to look for a fan-specific message.
In this case, a “Fan Disconnected” message is a sign that will let you know there is something wrong with the part and that it has to be tightened.

2. Secure The Orange And White Wires
At this point, you will know there might be something wrong with the wiring.
Multiple wires help connect the fan in the Traeger and that is how it works. If one of those wires comes loose, it is not going to have enough power to work as intended.
It will also have limited efficiency due to the wiring not being in good shape.
With this in mind, you are going to look for the orange and white wires near the fan.
These are the wires that tend to get loose near the fan.
Look to go to where the wires are connected and then push them back in. If they were loose, you are going to notice this right away.
Also, take the time to look for damage to these wires. If they are damaged, you will need to replace them.
3. Look For Grime On The Fan
If the Traeger has been used for a long time, you will need to look for grime on the fan too.
This is a serious concern because too much debris on the Traeger fan will cause it to become ineffective and unsafe.
You do not want this to happen.
Look to open up the bottom grill grate to expose the fan.
This will let you see whether or not the fan is clean. If there is grime on it, you will want to clean it immediately or it will not work.

4. Check For A Melted Fan
The last step is when you have tried all other options and it is clear there is something wrong with the fan itself.
There might be a situation where the fan has melted from the corner.
This is not a good thing and that likely means the fan is gone.
You will need to find a compatible fan and change it for the Traeger to work again. This is not an ideal situation to be in but you can work around it with a new fan.
This is going to take a few minutes and the new fan will get the grill to work as you want it to.
Final Thoughts
If you follow this guide on what to do if the Traeger fan is not working, the pellet grill will be back to how it needs to be.
If the Traeger fan is not working, start by looking for a “Fan Disconnected” alert on the screen. If this alert is there, tighten the orange and white wires connecting the fan to the grill. Next, check to see if the fan is dirty and clean it. if the fan is damaged or melted, it will need to be replaced.
This is what you will want to think about when it comes to how the grill is and how it needs to be kept in good shape.
Go through these details and your pellet grill will work as intended.