Any type of fire is dangerous and it’s something to nip in the bud as soon as possible.
If the Traeger has burst into flames suddenly, you will want to figure out what is going on and then make sure the pellets are kept in control.
If you don’t do this, you are going to worsen the situation.
A common issue people will notice when it comes to fires will be a Traeger fire in the auger tube.
If there is a Traeger fire in the auger tube, this means there are too many pellets in at one time or they are wet. To fix the issue, start by removing some of the pellets, make sure all of them are dry, and then clean the ironwood. It is also recommended to change the foil on the drip pan.
A lot of issues arise when the pellets are not well-maintained.
You will want to be careful when it comes to this or you are going to damage the auger tube or the grill as a whole.
This article will help take a look at how to fix a Traeger fire in the auger tube and what to look at during the process.
Table of Contents
How To Fix Traeger Fire In Auger Tube
1. Remove Excess Pellets
The first and most common reason for a Traeger fire in the auger tube will be excess pellets.
This can happen due to people not paying attention to how many pellets are in the grill at one point. If you are excessive with this, it will get to the point where the damage is too much.
You will want to make sure you are removing the excess pellets as carefully as possible.
This is essential to ensure you are on the right path and the results are on par with what you need.
If you are not looking at the pellets, you could have a much bigger fire in the auger tube. The best place to start will be to begin taking out the pellets one by one. They should not be stacked on top of each other to the point there is no space.
This is bad for the Traeger and will lead to a bigger flame.

2. Dry The Pellets
Another detail to think about will be the condition of the pellets.
You have to make sure the pellets are dry as that is one way to control whether or not the flame worsens. If the pellets are wet, this can act as a trigger for the fire in the auger tube.
You will want to take the time to pay attention to the pellets and their condition.
If you do this, you are going to have a much better chance of ensuring the pellets are in the condition they need to be.
3. Clean The Ironwood
You will want to take the time to clean the ironwood.
This is something you should be doing regularly.
You do not want a situation where the ironwood is not well-maintained as this is going to do more damage than you want it to.
The best place to start is to make sure the ironwood has been cleaned and is in the shape it needs to be. As long as you do this, you are going to see good results and it will turn out as you want it to.
Clean the ironwood and make sure it is in the condition you want it to be.

4. Change The Foil On The Drip Pan
It is also important to look at the drip pan.
The grease is going to go somewhere when you are grilling and that creates a situation where the drip pan becomes a problem.
The foil cannot be allowed to age to the point it bursts into flames.
This is why you will want to remain on top of the maintenance schedule when it comes to this part of the Traeger.
The easiest way to do this is to remove the foil and make sure the grill is in pristine condition. This is a part of maintaining it throughout the year.
Final Thoughts
This is how to fix a Traeger fire in the auger tube.
To fix a Traeger fire in the auger tube, start by removing the excess pellets, dry the pellets, and then make sure to clean the ironwood. Once done, it is also recommended to replace the foil in the drip pan.
This is going to make sure the chances of a fire breaking out in the Traeger will become slim.
You have to be careful when doing this or you are going to have a situation where things worsen. Look into this and ensure you are on the right path when it comes to how the Traeger fire is managed and prevented.
This is key when managing a grill.