It is not ideal to turn on the pool and then dirt starts coming out of the jets.
This is a real concern and it is something you are going to want to dig into right away. It is not good for dirt to start spreading throughout the water as it will render it impossible to swim in safely.
You have to think about the pool water’s quality and how safe you are while swimming in it.
This is why asking, “Why is dirt coming out of my pool jets?” becomes important.
Dirt is coming out of your pool jets because the filter is clogged. This causes dirt to get pushed into the jets. To fix the issue, remove the debris and then backwash the filter to cleanse the water.
This process should be done often to make sure things are as clean as they need to be.
You don’t want a situation where dirt continues coming out of the pool jets without fixing them. This is a mistake that will become harder to manage as time goes on.
This article is going to look at what to do if there is dirt coming out of the pool jets.
Table of Contents
How To Fix Dirt Coming Out Of Pool Jets
1. Inspect The Pool Filter For Clogged Debris
If there is dirt coming out of the pool jets cartridge filter, it’s recommended to start by inspecting the filter in greater detail.
What you are going to be looking for is clogged debris.
This is the reason the dirt is coming out of there.
You need to make sure the filtration system is working the way it is designed to. When it does not, the water is going to get worse with time and you will only fix it by getting rid of the debris.
A clogged pool filter is not good and is going to do considerable damage to the pool water’s quality. This is going to be noticeable as the pH level is going to rise but also the visible quality of the water is going to worsen too.
You have to be quick when reacting to something like this.
2. Remove The Debris
You will want to take the time to remove the debris in the pool filter.
This is the best way to make sure the debris does not worsen with time and you keep things as clean as they need to be.
A lot of mistakes can be made when it comes to the excess debris in the pool filter.
You will want to take out the debris as soon as possible.
This is the only way to make sure the debris doesn’t continue to clog the pool filter and then ruin the pool water’s quality.
It’s best to clear it out right now.
3. Backwash The Filter
Backwashing is integral for maintaining a pool filter.
You are going to want to account for this when dirt starts coming out of the pool jets.
You will need to consider turning on this setting to let the pool filter push water through. The purpose of doing this is to make sure the pool water does not get filtered until you have fixed the filter.
It is a way to bypass the filter.
You will want to look at doing this from time to time until the pH level of the pool water gets back to what you want it to be.
This is an important step for fixing a situation where the pool filter is not working properly.
4. Check the pH Level
The last step is to check the pH level in the pool.
Since there is dirt coming into the pool water, you will need to figure out what is causing it to ruin the water. This includes figuring out how bad the damage is based on the amount of dirt in the pool water.
The best way to do this is to run a pH test.
You will want the pH to be around 7.9 for the pool to be safe. If it is not at this number, you will need to check the pool filter and continue cleaning the water.
Why is dirt coming out of my pool jets?
Dirt is coming out of your pool jets because the pool filter is clogged. To fix the issue, remove the debris from the pool filter and then begin the backwashing process to clean the water. Once done, make sure the pH is stable.
It is best to take your time going through the issues in front of you.
Do not let the pool filter run when it is in this condition. It will only get worse and that is not good for your pool jets.
The pool filter has to be running in pristine condition for it to keep the pool clean.