The snow blower is supposed to be efficient, safe, and easy to move around.
For the most part, the average snow blower is not going to cause issues and is going to start throwing snow as soon as it is turned on.
However, you might have trouble getting it to work at times. This is when you wonder, why is my snow blower pushing snow?
The snow blower is pushing snow because the speed has to be increased, the auger blades have dulled, or the chute is clogged. To fix this issue, remove snow from the chute, spray it with WD-40, increase the speed, and check the auger blades.
This is the best way to make sure you are not creating an issue where the snow blower does not move the snow as you want it to.
This guide will look to show you more about how to fix a snow blower that’s pushing snow and what types of changes are mandatory. If you don’t make these changes, the snow blower is going to continue pushing snow instead of throwing it where it needs to go.
Table of Contents
Steps On How To Fix Snow Blower That’s Pushing Snow
1. Unclog The Snowblower Chute
The reason a snow blower is pushing snow instead of throwing it has to do with the snow not getting to where it needs to go.
When the snow blower moves, it has to push the snow into the chute. This is what the auger blades are responsible for when the machine is running.
Your best bet is to look at the chute and see if there is snow in there.
Sometimes, the snow has ice in it, which starts to clog up the snowblower chute. This does happen from time to time and there is nothing to worry about when it comes to clearing it.
You will want to remove it by hand and then look at lubricating the snow blower chute.
2. Oil The Auger Blades
The auger blades might have become aged over time.
This does happen and you will need to be careful about how you handle something like this. The goal is to oil the auger blades to the point they do turn as required.
If you are not doing this, the auger blades are not going to pick up the snow as required. This causes the snow to just get pushed forward.
It is also important to make sure the auger blades in the snow blower are turning properly. If not, this is another reason they are not going to throw snow.
You have to be focused on checking how the auger blades move and see if any hitches need to be corrected. This does happen from time to time.
3. Increase Snowblower Speed
You will want to assess the snow blower’s speed.
A common worry people have has to do with the overall snow blower speed and how it moves over time. If you are not doing this, you are not going to get the snow blower speed to reach the speeds that you want.
It is best to make sure you are increasing the snow blower’s speed to the point it gets from point A to point B.
This will help move the blades fast enough where the snow is going into the chute. Otherwise, all you are going to end up doing is moving the snow forward and then getting the snow blower stuck in one spot.
4. Lubricate the Snowblower Chute With WD-40
You will want to take the time to lubricate the snow blower chute.
A lot of people worry when it comes to how the snow blower chute works and that is a hurdle you will not want to deal with.
It’s best to make sure you are thinking about how the snow blower chute is going to be lubricated over time. If you are not doing this, you will not see appropriate results.
You should look to lubricate the snow blower chute from time to time. If you are dealing with this problem then there might be something in the snow blower chute as mentioned above.
Once the debris is removed, you can then spray the WD-40 into the snow blower chute to make sure the snow goes through without getting stuck.
Final Thoughts
Why is my snow blower pushing snow?
The snow blower will start pushing snow when the chute is clogged, the auger blades have dulled, or the speed is too low. To fix the issue, increase the snow blower’s speed, unclog the chute, oil the auger blades, and then apply WD-40 to the chute.
This is how you are going to get the snow blower to function properly.
If not, the snow is going to get trapped in the machine and it will not move as you want it to.
